Dan_K9ZF wrote:
> Tony,
> How do you think a pair of the MOT's would hold up? I've been planning
> to build a power supply like the one you put together, only using a pair
> of trannys in parallel. This would be set up to drive a pair of GI7b's,
> hopefully.... Been in the planning stages for a couple of years now, hi hi.
>
> 73
> Dan
I see no problem using a pair of them. In fact, it makes it easier if
you want to run a full wave center tapped HV supply. I would still pull
the grounded end off the ground lug and bring the junction of the two
out as B- which you probably do not want right at ground potential but
it should work fine. It also gives you the option to run the primaries
in series on 240V if you wanted to. This takes us back to a previous
transformer discussion ;)
73, Tony W4ZT
<snip>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|