On Tuesday 14 November 2006 19:34, you wrote:
> Except in class A the input power never changes. If it is set up for 6000
> watts input in order to provide 1500 watts output @25% efficiency then the
> input power will always be a constant 6000 watts with or without
> modulation or carrier.
Gary,
You're right, input power doesn't change. You could just plan for the worst
case dissipation with carrier.
Jeff/KA5MIR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|