Hi Carl,
Preformed Line Products says: ""Guy-Grip Dead-ends are intended for
use on single wood poles associated with distribution construction."
If you examine the Rohn tower hardware catalog, they list only Big Grips,
never a mention of using wood pole Guy Grips on any of their towers
For a few dollars more you can use the BG-2144 Big Grip product
recommended by the manufacturer for use on towers.
Use Guy Grips for wood poles at your own risk...
73
Frank
W3LPL
----- Original Message -----
From: "Carl" <km1h@jeremy.mv.com>
To: donovanf@starpower.net, "Bill Wichers" <billw@waveform.net>
Cc: topband@contesting.com
Sent: Thursday, September 4, 2014 7:14:00 PM
Subject: Re: Topband: WTB: Guy wire stuff
Not according to the folks that invented them Frank. The Big Grip is a Guy
Grip for serious towers.
http://www.preformed.com/index.php%3Foption%3Dcom_phocadownload%26view%3Dcategory%26download%3D44:plp-commcatsec20-2012%26id%3D15:strand-and-cable-products%26Itemid%3D145&rct=j&frm=1&q=&esrc=s&sa=U&ei=nqoIVJWDDcmayAT5hoHQDA&ved=0CBQQFjAA&sig2=1aPQDpfnvYFm8XWlxXxgjw&usg=AFQjCNEns72sjImeKDRibuLmm62WL9bSqA
The Preform name is often used as a noun by cable apes (-;
Carl
KM1H
----- Original Message -----
From: <donovanf@starpower.net>
To: "Bill Wichers" <billw@waveform.net>
Cc: "Carl" <km1h@jeremy.mv.com>; <topband@contesting.com>
Sent: Thursday, September 04, 2014 1:40 PM
Subject: Re: Topband: WTB: Guy wire stuff
> Tower guys should use Big Grips, not the performs used by electric
> utilities. You can purchase Big Grips from Texas Towers and many other
> suppliers
>
> 73
> Frank
> W3LPL
>
> ----- Original Message -----
> From: Bill Wichers <billw@waveform.net>
> To: Carl <km1h@jeremy.mv.com>, topband@contesting.com
> Sent: Thu, 04 Sep 2014 13:31:07 -0400 (EDT)
> Subject: Re: Topband: WTB: Guy wire stuff
>
> If you only need a few like this, try calling some of the utility
> contractors in your area. They will always have the dead ends and the guys
> that also do the power work will also have the insulators. They will
> probably be able to sell you a few without too much trouble.
>
> BTW, the utility guys will usually call the "dead ends" "preforms"
> (different industry, different terminology :-), but they are the same
> thing. The telco/cable guys use 1/4" EHS strand for a support line for
> their cables so they will always have hardware for that. The preforms are
> cheap enough from the crew's perspective that they are occasionally used
> as temporary "twist ties" to hole up cable prior to lashing.
>
> You can order the stuff from Graybar too (probably the telecom division,
> but the power division can get stuff too), but I don't know about their
> prices. I've only ever ordered by the carton at work.
>
> -Bill
>
> > What I need is:
> >
> > Up to 12 502 guy insulators
> > Up to 18 1/4" deadends/guy grips
> >
> > Individually prices from dealers is ridiculous and I dont need case
> loads as I
> > bought when building the other 3 towers in 90-91 and wound up giving
> away
> > what I didnt use.
> >
> > Any help appreciated.
> >
> > Carl
> > KM1H
> >
> > _________________
> > Topband Reflector Archives - http://www.contesting.com/_topband
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4015/8153 - Release Date: 09/04/14
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|