Towertalk
[Top] [All Lists]

[TowerTalk] 9913 Reliability

To: <towertalk@contesting.com>
Subject: [TowerTalk] 9913 Reliability
From: steve@oakcom.com (Steve Maki)
Date: Wed, 19 Dec 2001 19:26:18 -0500
W8JI wrote:

>You would NEVER get away with "sealing" 9913 in GA and 
>keeping water out.  It probably is fine in Arizona, however.
>
>The only way I can think of the be safe in a humid climate is to 
>flood the first few inches of cable with RTV after filling it with dry air.
>
>Problems are proportional to length and the "drop" in the cable, as 
>well as local climate. If you have a flat run that is short, even if it is 
>a mild leaker, you likely won't find a pool of water no matter how 
>hard you look.
>
>If you have a 160 foot vertical drop, water will pool at the bottom no 
>matter how you seal the stuff, short of plugging the ends with a few 
>inches of RTV after purging it with dry air!
>
>Hollow cables without dry air pressure are a dumb idea. The loss 
>decrease is very minor over foam, and no matter what you do it is 
>unlikely you can seal a cable so good with air so dry you never 
>have a problem, desert areas excluded.

While I think LMR-400 is a much better choice than 9913, water
ingress is caused by improper weatherproofing, period.

Proper weatherproofing WILL keep the water out - it'll also keep
it IN of course. Keeping a reel dry until it is installed is the
larger challenge in my view.

--
Steve K8LX

AN Wireless Self Supporting Towers are now available!  Windloading tables,
foundation diagrams and charts, along with full details are now at the
AN Wireless Web site:  http://www.ANWireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>