Amps
[Top] [All Lists]

[AMPS] 50~ vs 60~ ???

To: <amps@contesting.com>
Subject: [AMPS] 50~ vs 60~ ???
From: 2@vc.net (2)
Date: Sat, 2 Jun 2001 05:59:39 -0700
>
>Uwe is right.
>
>I lived in Moscow 2 1/2 years and Budapest 4 years and managed to cook the 
>original plate transformer in a Henry 2K during a contest, even with a fan 
>running on it.  It grunted a LOT.  Replaced it with a heavily rated Peter 
>Dahl xfmr and no problems.  The voltages will be ok, it's just that the 
>cores 
>tend to saturate if you draw a lot of current from the xfmr.  Limit your 
>current and you should be OK.
>
/\  The I^2R heating in 60-Hz transformers that are operated on 50Hz 
comes primarily from the primary.  The two fixes are:  reduce the primary 
v. proportionately. or add turns to the primary.  Decreasing the 
secondary current will not make much difference in heating.    
>
later, Mike

>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/amps
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>
>


-  R. L. Measures, 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>