> "The SB220 transformer was designed for a kilowatt INPUT
> DC,
> which was the legal input when it was designed. This was
> about 450 mA at about 2200 volts. It was...(etc)"
>
>
> If this is so, why should anyone ever have bought an
> SB-220, when the
> SB-200 was also rated at that exact same power, with a
> much lower price?
Because the SB200 was not rated at a kilowatt input power,
as measured on the meters, on SSB.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|