> Peter,
>
> Exactly! There's not different sizes for different output
> powers for nothing.
> Best,
> Will
Just to be clear, no one is suggesting otherwise.
But a 10kVA transformer design does NOT come up to kVA and
then start limiting. Much of the previous wording in this
thread seemed to imply flux density limited power.
I would want people to walk away assuming an XX power rated
transformer delivers XX watts and then starts to "saturate".
Basically it just runs hotter and hotter with increased
load, like there is a reasonably linear series resistor
inside.
73 Tom
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|