Denny,
I believe that was Larry's point also. It's certainly my observation here.
Does not take much of that power floating around in the cores to warm those
babys up either. :)
73/jeff/ac0c
www.ac0c.com
--------------------------------------------------
From: "Dennis OConnor" <ad4hk2004@yahoo.com>
Sent: Wednesday, August 04, 2010 7:21 PM
To: <amps@contesting.com>
Subject: Re: [Amps] New HF amplifier
> "So you're saying Alpha, Ten-Tec, Jim W8ZR, Jerry K8RA and myself are all
> wrong and their designs don't or wont work?"
>
> ummmm, very short and very blunt answer, yes...
>
> Longer, more nuanced answer, those designs will not work "optimally"
> because of lost energy (heat) from the pumping of out of phase currents in
> the toroid cores that have taps and unused turns - energy that should have
> gone out the coax...
>
> For a proper design, go look at the Palstar HF2500DX... Each band has it's
> own separate toroid, uncoupled from the turns on the unused cores, so that
> there are no out of phase currents induced into the operating core...
>
> If my answer is over blunt, I apologize - you asked the question and that
> is my answer... I am not looking to get into a squabble with anyone...
>
> cheers
> denny / k8do
>
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|