Amps
[Top] [All Lists]

Re: [Amps] RG6 Power Handling

To: "Larry Benko" <xxw0qe@comcast.net>, <amps@contesting.com>
Subject: Re: [Amps] RG6 Power Handling
From: "Carl" <km1h@jeremy.mv.com>
Date: Thu, 19 Jun 2014 13:34:01 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Not very flexible.

Low power circuits can use RG-174 or 178.

Carl
KM1H


----- Original Message ----- From: "Larry Benko" <xxw0qe@comcast.net>
To: <amps@contesting.com>
Sent: Thursday, June 19, 2014 12:32 PM
Subject: Re: [Amps] RG6 Power Handling


RG-142 (50 ohm)

Same size as RG-58 and rated at 30MHz 1:1 SWR of 3.1KW average power

Larry, W0QE

On 6/19/2014 10:22 AM, Manfred Mornhinweg wrote:
Hi all,

what 50Ω coax cable would be recommended for the internal wiring of a compact 160-10m legal limit amplifier? I'm looking for a cable thinner than RG-8, much more flexible, non-foam (to avoid de-centering in bends), and that can be purchased easily in small quantities. Of course, it must handle the power, even with a slightly elevated SWR, without overheating.

Suggestions are welcome!

Manfred


========================
Visit my hobby homepage!
http://ludens.cl
========================
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4592 / Virus Database: 3972/7706 - Release Date: 06/19/14


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>