Karlnet
[Top] [All Lists]

RE: [Karlnet] Karlnet's WPBASE+, four interface board?

To: "Norm Young" <npyoung@applegatebroadband.net>, "Karlnet Mailing List" <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] Karlnet's WPBASE+, four interface board?
From: "Nate McLain" <nate@ctrail.net>
Reply-to: Karlnet Mailing List <karlnet@WISPNotes.com>
Date: Fri, 11 Apr 2003 07:50:45 -0500
List-post: <mailto:karlnet@WISPNotes.com>
Yes the WPBASE+ has 2 radio slots and 2 ethernet slots.
You would need to get a SG-4200 license though. And no it isnt the base
station license.... It is the same license format as all the other radios
out there. And there is a different bin file for the new KN boards as well.

Nate

-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Norm Young
Sent: Friday, April 11, 2003 12:15 AM
To: Karlnet Mailing List
Subject: [Karlnet] Karlnet's WPBASE+, four interface board?


Is this new board have two radio slots on it as well as two Ethernet?  I'm
looking at replacing using the second radio slot in our existing AP-1000
currently used as a backhaul with a dedicated device.  I was looking at just
using the RG/SR-4200 combo, but I have use for a second radio slot to
provide a link to another potential WIPOP.  Assuming the WPBASE+ supports 2
radios, what version of TC do I need to run on it to have access to both
radios?   SR-4X00?  (right)  Let me guess, I need to run a version of the
Base Station software.  <yikes!>

Heck, maybe I want to just run Lonnies StarOS on a low power SBC and use
some 802.11b/g radios on it?  It would undoubtably be much cheaper.  And
since both radios would be just doing PtP, probably work as well as TC,
especially if I use his polling mechanism.

Hmmm...choices, choices.


_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet



<Prev in Thread] Current Thread [Next in Thread>