Second radio would do PtP, as guessed.
Norm
----- Original Message -----
From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
To: "Norm Young" <npyoung@applegatebroadband.net>; "Karlnet Mailing List"
<karlnet@WISPNotes.com>
Sent: Saturday, April 12, 2003 11:49 AM
Subject: RE: [Karlnet] Karlnet's WPBASE+, four interface board?
> >Is this new board have two radio slots on it as well as two Ethernet?
>
> correct, the WPBASE+ has 2 radio slots & 2 ethernet slots
>
> >I'm
> >looking at replacing using the second radio slot in our existing AP-1000
> >currently used as a backhaul with a dedicated device.
>
> ok
>
> >I was looking at just
> >using the RG/SR-4200 combo, but I have use for a second radio slot to
> >provide a link to another potential WIPOP. Assuming the WPBASE+ supports
2
> >radios, what version of TC do I need to run on it to have access to both
> >radios? SR-4X00? (right) Let me guess, I need to run a version of the
> >Base Station software. <yikes!>
>
> SG
> what is your second radio slot on the WPBASE+ going to do...
>
> if it's just PtP, SG-4300 is fine
>
> >Hmmm...choices, choices.
>
> what would life be w/out em
>
> -Charles
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|