This brings to mind a question I have been meaning to ask for a long time.
Will a Turbocell client automatically adjust sensitivity or does it lock at
the rate you set. In other words, if you set an RG at 11mb, will it train
down to 5.5 or 2mb in order to maintain a connection or is it 11mb or
nothing?
Also, am I correct in assuming that the speed the access point will run at
is the same as the lowest speed of any client connected.
----- Original Message -----
From: "Chris Conn" <cconn@abacom.com>
To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
Sent: Thursday, September 11, 2003 5:51 PM
Subject: RE: [Karlnet] RE: Ping Jitter
> On Thu, 11 Sep 2003, Kevin Knuth wrote:
>
> > Chris,
> >
> > I appreciate your viewpoint, but we have seen examples where ping times
> > grow into SECONDS, and that simply is NOT acceptable.
> >
> > Other than that, I do agree with your point!
> >
> > Kevin
>
> Hello,
>
> Yes, 1000+ms or more (for other reasons than base congestion) can be
> indicative of other issues.
>
> I am still curious; the people at that say that 15dBm SNR or less
> causes this, are they using 11Mbps only as their sensitivity?
>
> Chris
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|