> -----Original Message-----
> Yes SOMETHING is wrong and that is what I am trying to figure out. But
I
> did
> start at the beginning. All towers (will be) connected to the central
> relay
> point the KN-200. This gets its feed to the net from the PTP between
the
> central relay and the data center, the PTP consists of an RG SAT (@
> datacenter) sending the feed to the 1st radio interface on the KN-200
> Base,
> the second radio interface is on a horizontal 8.5db omni. This is
where I
> am
> doing the testing, the configurator ping fill says the PTP link is
pulling
> around 3 1/2 MB/S but when I connect the the ethernet drop I only get
> 800-1.2MB/S to the net when we have 3MB/S being sent out.
You have a 3MB link to the internet? Your testing from which type of PC
(xp, 98se?, linux, mac?) how are you testing the 1.2MB?
>
> > Also RG1000's max out around 1.6Mbps (up & down)
>
> Thats what karlnet said. But why is the configurator measuring the
> connection from the RG to the KN at 3MB/S+? Replacing the RG with
another
> KN
> would increase this by what?
The 3Mb/s is a result of 1.5Mb + 1.5Mb, if you were graphing them in
real time you could see this, we use a Compaq utility which shows us in
realtime usage through our entire network
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|