> [Original Message]
> From: Olinger, Steven L <firstname.lastname@example.org>
> I recently had a new Trane high efficiency furnace installed in my home.
> When the burner comes on, channels 2-6 have interference on the screen.
> I use an antenna for reception, not cable or satellite. Trane has been
> contacted, but are not sure what the problem is. I have replaced and
The HV igniter uses a ~10+ KV source and a spark gap and can do what you
describe. Famous for it, in fact, and if Trane doesn't know, you're talking
to the wrong folks there.
RFI mailing list