OTOH, if the heater's thermostat is a standard thermo-mechanical type,
you probably don't need to know all that. I tracked down a noise source
a few years ago that turned to be an older, heated dog dish. The owner
replaced it with a new one of the same type, and the noise went away.
You could hear the contacts arcing.
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000
On 2/10/2011 10:02 AM, Peter Laws wrote:
> On Thu, Feb 10, 2011 at 02:05, Jim Brown<jim@audiosystemsgroup.com> wrote:
>> On 2/9/2011 5:42 PM, KD7JYK DM09 wrote:
>>> Out of curiosity, how much RFI can a piece of nichrome wire produce?
>>>
>> You're asking the wrong question. Some of the right questions are, "what
>> is the nature of the current source for the heating element, what is the
>> waveshape, what is the spectra, and what is the enclosed area of the
>> loop that carries that current?" And, as others have suggested, the same
>> questions should be asked about the thermostat.
>
> The guy at the fish store will NOT know these answers. :-D
>
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|