Hi all,
The hunt for the W1AW/x stations continues! I have managed a good few so
far, but I have to wonder about the operating techniques of some of the
operators.
Just for the heck of it, I am aiming to work WAS using only W1AW/x calls.
Most are working split, which is best, but there are a few, and have been
others, that seem to insist on working simplex. This results in a complete
mess, and makes it very difficult to get that all important confirmation
of
the QSO.
Earlier today, W1AW/4 was on both 21088 and 28088, saying UP 2 after each
QSO. That worked well, and I logged both bands.
W1AW/1 was on 21082, but trying to work simplex, and the resulting pile
made
it impossible for him to work many callers.
So far, there have been a few ops who clearly don't do RTTY on a regular
basis! This is based on the macros in use, simplex operation, and poor
control.
Some of the macros appear to have numerous spaces between calls and info,
and take up almost two lines. The completion of the QSO would be far
better
served by a quick TU (call) W1AW/x up 2, rather than this:
GU0SUP DE W1AW/x TU
CQ W1AW/x W1AW/x CQ UP 2 UP 2 PSE KN
I am sure this is preaching to the converted, but some of you may know the
ops, so please pass on the message!
W1AW/x is wanted by many, so working split is obviously the way to go.
There
is no difference in working split and getting no response to working
simplex
and getting no response - EXCEPT that if you do start to get a pile-up,
being in split mode gives you the upper hand!
And why not use contest-type software with callsign recognition too!
Whoever
was the op at W1AW/4 yesterday on 17m seemed to think I was GU0SKP, and
even
after trying to correct it, he still sent TU GU0SKP.
Just my thoughts!
73 de Phil GU0SUP
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty