Dave - that was it, just hidden and I was sure what I was looking for, All
squared away now.
73 & thanksPaulkc2nyu
From: Dave Hachadorian <k6ll.dave@gmail.com>
To: paul ecker <eckerpw@yahoo.com>; reflector RTTY <rtty@contesting.com>
Sent: Saturday, March 19, 2016 3:27 PM
Subject: Re: [RTTY] 2Tone Ssetup Help
Well another DI Window is supposed to open, along with the 2Tone
engine. Maybe the 2Tone engine is hidden behind something else?
Look on the left side of the bottom taskbar - do you see an icon
with 2T printed on it? If so, it is running, and you just have
to move stuff around until you find it.
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
From: paul ecker via RTTY
Sent: Saturday, March 19, 2016 8:48 AM
To: RTTY ; rtty-request@contesting.com
Subject: [RTTY] 2Tone Ssetup Help
Having trouble setting up 2tone as a second decoder in N1NN+Have
tried following instructions in
http://www.rttycontesting.com/tutorials/n1mm/classic/digital-interface-for-2tone/,but
still not succeeding.I go to Digital interface window- Setup-Add
Rx Windows-OpenAdd. Rx Window(4 avail);
- In initial setup, I have MMTTY selected as window type,and
under MMTTY Setup, have the path to 2Tone directory and
2tone.exe..
but when the RX Window 2 opens, it looks nothing like the 2Tone
enginewindow, but just like the main Digital interface window I
am using for MMTTY.
Any ideas where I am missing the boat on getting 2tone towork? I
have Win 7 pc, N1MM+ v1.0.5541.0
Tnx Paulkc2nyu
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|