On 3/20/2016 21:51, Don Hill AA5AU wrote:
Steve wrote:
"What is the advantage of running 2Tone as a second decoder?"
When you run more than one decoder, you gain diversity. When you run 2Tone
is a second RTTY window, MMTTY is still decoding in the other. Both decode
the same signal at the same time. There will be times when both decode fine.
There will be times when MMTTY will decode something that 2Tone misses and
times when 2Tone decodes something that MMTTY doesn't.
MMTTY has been a good decoder for many years (since 2000 I think), but 2Tone
is hands down better overall. I currently run MMTTY in one RTTY window and
2Tone in two additional receive-only windows.
73, Don AA5AU
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Steve Carpenter
via RTTY
Sent: Sunday, March 20, 2016 8:37 PM
To: rtty@contesting.com
Subject: Re: [RTTY] 2Tone Ssetup Help
On 3/19/2016 15:27, Dave Hachadorian wrote:
Well another DI Window is supposed to open, along with the 2Tone
engine. Maybe the 2Tone engine is hidden behind something else? Look
on the left side of the bottom taskbar - do you see an icon with 2T
printed on it? If so, it is running, and you just have to move stuff
around until you find it.
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message----- From: paul ecker via RTTY
Sent: Saturday, March 19, 2016 8:48 AM
To: RTTY ; rtty-request@contesting.com
Subject: [RTTY] 2Tone Ssetup Help
Having trouble setting up 2tone as a second decoder in N1NN+Have tried
following instructions in
http://www.rttycontesting.com/tutorials/n1mm/classic/digital-interface
-for-2tone/,but still not succeeding.I go to Digital interface window-
Setup-Add Rx Windows-OpenAdd. Rx Window(4 avail);
- In initial setup, I have MMTTY selected as window type,and under
MMTTY Setup, have the path to 2Tone directory and 2tone.exe..
but when the RX Window 2 opens, it looks nothing like the 2Tone
enginewindow, but just like the main Digital interface window I am
using for MMTTY.
Any ideas where I am missing the boat on getting 2tone towork? I have
Win 7 pc, N1MM+ v1.0.5541.0
Tnx Paulkc2nyu
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
What is the advantage of running 2Tone as a second decoder? What happens to
MMTTY while it is running? Do you switch back & forth between them?
Would it be okay to just run 2Tone as your only decoder? Does it have some
superiority over MMTTY? (Sorry...That's a lot of questions, but I've only
been running RTTY for about a year and a half, so I'm still learning).
Steve K4DXV
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
Thanks, Don. That pretty much answers it all! I think I'll try it. By
the way, I saw you spotted a couple of times last night and today but
could never hear you. Pretty cruddy conditions, plus Murphy or a
leprechaun (or both) have been visiting for the whole weekend! Thanks
again for the info.
Steve
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|