On 3/19/2016 15:27, Dave Hachadorian wrote:
Well another DI Window is supposed to open, along with the 2Tone
engine. Maybe the 2Tone engine is hidden behind something else? Look
on the left side of the bottom taskbar - do you see an icon with 2T
printed on it? If so, it is running, and you just have to move stuff
around until you find it.
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message----- From: paul ecker via RTTY
Sent: Saturday, March 19, 2016 8:48 AM
To: RTTY ; rtty-request@contesting.com
Subject: [RTTY] 2Tone Ssetup Help
Having trouble setting up 2tone as a second decoder in N1NN+Have tried
following instructions in
http://www.rttycontesting.com/tutorials/n1mm/classic/digital-interface-for-2tone/,but
still not succeeding.I go to Digital interface window- Setup-Add Rx
Windows-OpenAdd. Rx Window(4 avail);
- In initial setup, I have MMTTY selected as window type,and under
MMTTY Setup, have the path to 2Tone directory and 2tone.exe..
but when the RX Window 2 opens, it looks nothing like the 2Tone
enginewindow, but just like the main Digital interface window I am
using for MMTTY.
Any ideas where I am missing the boat on getting 2tone towork? I have
Win 7 pc, N1MM+ v1.0.5541.0
Tnx Paulkc2nyu
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
What is the advantage of running 2Tone as a second decoder? What happens
to MMTTY while it is running? Do you switch back & forth between them?
Would it be okay to just run 2Tone as your only decoder? Does it have
some superiority over MMTTY? (Sorry...That's a lot of questions, but
I've only been running RTTY for about a year and a half, so I'm still
learning).
Steve K4DXV
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|