Interesting conversation!
So what I am reading is this.
Use a 1:1 current balun remote to the tuner to use my 600 ohm feedline.
Now
Somewhere along the way, depending on the length of the coax between the tuner
and the balun, wouldn't I be just matching the say 14 foot run of coax from the
tuner to the balun? And not necessarily matching the antenna?
Lets take it one more step
Place the 1:1 balun at the feed point 200 feet away and feed it with coax?
Dosen't sound like a good idea.
Mike wb8vge
Sent from my iPhone
On Jul 11, 2013, at 5:59 PM, "Robert Mcgraw" <rmcgraw@blomand.net> wrote:
> Because your antenna impedance is not 600 ohms but is more lilkely 25 to
> 75 ohms depending on height above ground. Only the feedline is 600 ohms
> and that is really not an important issue.
>
> 73
> Bob, K4TAX
>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|