Hi, Snowy,
SMA is probably too big. SMC, SMB, MCX or MMCX connectors might work.
However, the vast majority of PLL problems with the Paragon are poor
solder joints or VCO misalignment. Most people reflow the solder joints
on both boards.
73,
Bob WB2VUF
On 9/23/2018 11:01 AM, ROLAND HOWELL via TenTec wrote:
Has anybody ever changed the plug in mini coax connectors on the PLL
ref/major and minor loop pcb,s.Reason for asking is that it seems that the
centre contacts are very hit and miss.I had been looking at the bigger versions
as fitted to the Omni and others, they are more substantial or changing them
for sma types.Just a thought in the hope that may be the answer to my PLL out
lock message.cheersSnowy
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|