Towertalk
[Top] [All Lists]

Re: [TowerTalk] Using US Tower HDX-572MDPL Raising Fixture

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Using US Tower HDX-572MDPL Raising Fixture
From: "Al Williams" <alwilliams@olywa.net>
Date: Sun, 29 Oct 2006 11:43:24 -0800
List-post: <mailto:towertalk@contesting.com>
Something must be wrong in your setup.  If it takes about 10 degrees for 
gravity to begin to take over with tilting from vertical, then
gravity should take over at about the same angle when tilting the tower back 
up??????


k7puc



----- Original Message ----- 
From: "Doug Rehman" <rehman@surveil.com>
>
> My Tri-Ex LM-354HDSP takes a good bit before it begins to tilt on its own
> (probably 10 degrees). My tower doesn't return to vertical by itself- it 
> has to
> be winched the entire way. (Possibly due to the mast length and antennas.)
>
> Doug
> K4DDR
>
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>