There are those who say NO, as it will add torque to the rotator and
it might fail. If it slips, then you have to climb/reposition the
mast in the rotator.
There are those who say YES, as it is the instruction given by the
manufacturer.
If it doesn't slip, it won't require the climbing/repositioning, but
the rotator might fail.
Flip a coin.
Don
N8DE
Quoting mrlogs <mrlogs@verizon.net>:
> Hi All..
> My Yaesu G-1000DXA manual say's to drill thru the mast & put a
> bolt thru the rotator & mast to keep it (the mast) from turning in
> the clamp. I was told to do a survey here & get everyone's input on
> doing this as it might be a bad idea..
> Thanks for your input!
> 73'..Tom N3ZC
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|