It would be interesting to see a printout of all the diameters, lengths wall
thicknesses and any other relevant info for each of the aluminum tubing pieces
that comprise one of these 66' vertical antennas. Many of us probably have more
than just a few compatable pieces already, from previous antenna projects,
estate sale antenna collections, etc. and we could just order the "missing"
pieces to make a complete 66' set.
I haven't checked to see if the instructions on the web site list the info for
the individual pieces of tubing.
-----Original Message-----
>From: RICHARD SOLOMON <w1ksz@q.com>
>Sent: Mar 13, 2009 7:11 PM
>To: TowerTalk <towertalk@contesting.com>
>Subject: Re: [TowerTalk] DX Engineering 66-Foot Vertical?
>
>
>You can do the same thing by buying 6' sections of Aluminum tubing
>
>from Texas Towers and a couple of boxes of SS Hose Clamps and
>
>save yourself $50 in the deal.
>
>
>
>73, Dick, W1KSZ
>
>> From: n7mal@citlink.net
>> To: mike@mallardcove.com; jmaass@k8nd.com; towertalk@contesting.com
>> Date: Fri, 13 Mar 2009 22:40:04 +0000
>> Subject: Re: [TowerTalk] DX Engineering 66-Foot Vertical?
>>
>> Here is a link for a similar product from Hy-Gain
>> http://www.hy-gain.com/Product.php?productid=ATM-65
>>
>>
>>
>> MAL
>> N7MAL
>> BULLHEAD CITY, AZ
>> http://www.n7mal.com
>> Everyone in the world is
>> entitled to be burdened
>> by my opinion
>>
>> ----- Original Message -----
>> From: Mike Fatchett
>> To: jmaass@k8nd.com ; towertalk@contesting.com
>> Sent: Friday, March 13, 2009 20:13
>> Subject: Re: [TowerTalk] DX Engineering 66-Foot Vertical?
>>
>>
>>
>> Here is the webpage for the 65 ft verticals from DXE. I have had a number
>> of people ask where I found it. It is found under vertical antenna parts
>> Aluminum tubing kits.
>>
>> http://www.dxengineering.com/Products.asp?ID={51E69B40-1957-45C7-98DD-1B5C9D
>> 56B2F0}&SecID=137&DeptID=32
>>
>>
>>
>> "A slip of the foot you may soon recover, but a slip of the tongue you may
>> never get over." Ben Franklin
>> -----Original Message-----
>> From: Jeff Maass [mailto:jmaass@k8nd.com]
>> Sent: Friday, March 13, 2009 5:07 AM
>> To: mike@mallardcove.com
>> Subject: [Spam] DX Engineering 66-Foot Vertical?
>>
>>
>> G'day Mike:
>>
>> I saw the following from you on the TowerTalk reflector:
>>
>> "I see DX Eng has a 66 ft vertical that
>> needs to be guyed and runs about $200
>> for the aluminum kit, $160 for the tilt
>> base and about $80 for the guying kit."
>>
>> I cannot find anything like that on the DX Engineering web pages: perhaps I
>> have a blind spot. Can you help me find it (model number, link, etc.)?
>>
>> We are looking to possibly add some phased verticals on 80m for the PJ2T
>> station, as we are not yet "rock crushing" on that band.
>>
>>
>> 73,
>>
>> Jeff Maass K8ND
>>
>> Station Manager PJ2T,
>> Caribbean Contesting Consortium
>>
>> CCC Web Site: http://www.pj2t.org
>> PJ2T Slide Show: http://www.k8nd.com/Radio/DELARA_PPT2.pdf
>> Curacao Critters: http://www.CuracaoCritters.com
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|