Towertalk
[Top] [All Lists]

Re: [TowerTalk] Low Loss 400, You get what you pay for

To: "Steve Davis -Davis RF Co." <sdavis@davisrf.com>
Subject: Re: [TowerTalk] Low Loss 400, You get what you pay for
From: Adam Shirley WJ4X <wj4x@amsat.org>
Date: Tue, 24 Mar 2009 09:52:32 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I also would throw Bury Flex in the running, it's what I use for 
everything 440 and down. I have a run of Jefe 400, and it works well on 
HF, but as far as measured spec, I have no clue, but it does appear to 
meet it's velocity factor, at least to the extent I can test with an MFJ 
269. (good enough for Amateur work.. HI HI) I use the Jefe with an OCF 
dipole, so I couldn't attest to it's vhf and up performance, but a lot 
of people use it  for wireless networking.

What's nice about the Bury Flex is the ability to use it for a rotator 
loop and home run it to the shack with no breaks between the antenna and 
the radio. Plus the material the jacket is made of seems to pull through 
conduit better, and is said to stand up to sunlight well. (I plan on my 
Bury Flex in conduit to last forever HI HI)

I'd buy from Steve again, he's a nice guy on top of having good prices 
and quick shipping.

73!
  -Adam
   WJ4X

P.S. Remember to waterproof the foam dielectric coax cables very very well.


Steve Davis -Davis RF Co. wrote:
>
>    And I know the best place to get LMR-400 at likely the lowest price, and 
> immediate delivery.... and I am unbiased, other than my financial interest, 
> and livelihood, etc. depends on :    DAVIS  RF Co.      HI
>
>    Feel free to contact me if any questions.
>
> But, as most people who know me, whatever we sell, quality is the first 
> consideration.
> Cheers, 73,
>     Steve ,  K1PEK,
> DAVIS RF Co.,  Div. of Orion Wire Co., Inc.
>
> Wire, Cable, RF Connectors and wire aerial parts.   LMR, Heliax, Eupen
>
> Commercial / Military / & Custom Cable Design
>
> tel:  978-369-1738     Fax:  978-369-3484
> www.DavisRF.com
>
>
> Message: 4
> Date: Mon, 23 Mar 2009 18:34:03 -0400
> From: "Alfredo Velez WP3C" <wp3c@aol.com>
> Subject: [TowerTalk] Low Loss 400 = LMR400?
> To: <towertalk@contesting.com>
> Message-ID: <78BF13EB5D5A4744AF9C1C7F7827EF8B@AlfredoVelez>
> Content-Type: text/plain; charset="iso-8859-1"
>
> HI
>
>
>
>    I would like to know if someone has tested or used the Low Loss 400 Coax.
> I have seen that some people compares to the LMR400, which have the same
> specifications.  I would like to know your opinion. 73?
>
>   

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>