As with any project, there are many ways to skin that cat.I have moved
crackup towers with a single axle dolly Old trailer straight axel with a float
36" X 30" sq tubing box welded ni the center, positioned the tower lattice
or tub type at it's a balancing point. The towers was lifted with a farmers
tractor jack. I have also moved them with 5 40" peaces of 8" od
schedule 80 PVC plastic pipe. Pulling with a lawn tractor and some job's
just moving by hand. Wayne W3EA Apr 2013 08:58:11 -0400
> To: towertalk@contesting.com
> From: ny9h@arrl.net
> Subject: Re: [TowerTalk] Triex WT51...again
>
> At 08:19 AM 4/23/2013, bill steffey NY9H wrote:
> >here is a US tower HD 472 rolling along on a dolly,,, which needed 2
> >layers of plywood....all 1600lbs.... without the winch...
>
>
>
> https://picasaweb.google.com/Bill.SteffeySr/NY9HIllinois19772013#5159160137939317794
>
> that link works
>
> sorry
> bill
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|