Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TowerTalk] Tack welding rebar, need howto

from [Jim Lux] [Permanent Link][Original]
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Tack welding rebar, need howto
From: Jim Lux <jimlux@earthlink.net>
Date: Fri, 03 Jan 2014 10:41:31 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com> 
On 1/3/14 9:54 AM, Richard (Rick) Karlquist wrote:


The rebar drawings never show these diagonals,
so I haven't used them in the past.  But this
sounds like a great idea in the future.  There
is no rule saying you can't put gratuitous
rebar in the hole.


At least until there's no room for the concrete<grin>





_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TowerTalk] Tack welding rebar, need howto, Jim Lux
Next by Date:  Re: [TowerTalk] Tack welding rebar, need howto, Grant Saviers
Previous by Thread:  Re: [TowerTalk] Tack welding rebar, need howto, Richard (Rick) Karlquist
Next by Thread:  Re: [TowerTalk] Tack welding rebar, need howto, Tom Anderson
Indexes:  [Date] [Thread] [Top] [All Lists]