The ERC Version 4, just announced, even includes the relays on the same
card, for a very economical solution.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 5/23/2014 2:14 PM, Gary A wrote:
Hi Magnus,
What I did was buy and build a PC to rotor control interface. Check
out the ERC-M USB Kit. It is easy and fun to build and you can mount
it inside the G-450 controller housing. I cut a square hole in the
back for the USB cable and a small hole for the dc power connector.
Ham Radio Deluxe interfaces with it and allows click and turn
functionality. I am sure most rotor control software will work.
See it here;
http://schmidt-alba.de/eshop/product_info.php?products_id=18
You will also need the rotorcard kit.
73
Gary
K4FS
On 5/21/2014 12:26 PM, Magnus A wrote:
Hi
I have a quite small antenna so I am using the G-450XL.
Now what I really miss with it is the ability to set it to a
direction and let it go by itself or even have it going by the
logging program to the direction of the call I have in the log.
Did anyone consider, try or make any theoretical calculations of
feasability if it is possible to use a G-1000 or G-2800 rotor control
box on my G-450XL rotator?
73 de Magnus SM6WET
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|