You will be stunned, not shocked by the price, if you can find one.
4 hole F females ala S0239 are available but pricey (Amphenol, $7.15),
although about 1/40 the price of the punch if it is priced like other D
punches. For receive antenna chokes, xformers, circuits, etc it is what
works for me with plastic boxes.
https://www.digikey.com/product-detail/en/amphenol-rf-division/222146/ACX1545-ND/1989993
If there is a China source it would be great to know about it.
Grant KZ1W
On 3/11/2019 16:32 PM, Al Kozakiewicz wrote:
Double "D" knockout/chassis punch is the required tool. Don't know what
diameter F connectors are offhand, but the tools are readily available and come in a
variety of sizes. Don't be shocked by the price.
Al
AB2ZY
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
tony.kaz--- via TowerTalk
Sent: Monday, March 11, 2019 6:34 PM
To: Towertalk
Subject: [TowerTalk] Tool for F-connector holes
Does anyone know of a tool that makes a nice hole in Carlon boxes for a
female F-connector with two flats that makes a nice hole so the connector
doesn't spin?
Tnx
N2TK, Tony
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|