Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tool for F-connector holes

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Tool for F-connector holes
From: jimlux <jimlux@earthlink.net>
Date: Mon, 11 Mar 2019 18:54:48 -0700
List-post: <mailto:towertalk@contesting.com>
On 3/11/19 4:32 PM, Al Kozakiewicz wrote:
Double "D" knockout/chassis punch is the required tool. Don't know what 
diameter F connectors are offhand, but the tools are readily available and come in a 
variety of sizes. Don't be shocked by the price.

Al
AB2ZY


Indeed, they're probably over $100..

Another way to solve the problem is to use a service like frontpanelexpress.com - you download their design tool, which lets you design a "front panel" = a piece of aluminum sheet metal with holes and cutouts in it. They have every imaginable shape and size cutout (Sub-D for DB25 or DB9, 22mm round with 1 or 2 keys, D, Double D, etc.)

You upload your design file, your panel shows up less than a week later, perhaps nicely labeled with engraved legends if you put those in.

Then you just bolt that into a rectangular hole in your box.


A quick look at their website shows that they make entire enclosures now (built up from 6 panels). they basically have a CNC router that machines panels.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>