I hate to say this without looking further, but I BELIEVE the B-310 has
RF sensing and will key when you transmit. The remote keyer connection
is used for alignment and in some cases when you want it keyed up with no
RF into it.
In that case, you can just ignore it.
73, Zack W9SZ
On Sat, 5 Jan 2008, k4gun@comcast.net wrote:
> I am aware that this is a dumb question. I'm asking it here because this
> crowd seems to be a lot easier on new guys than some of the boards and you
> guys are a lot more likely to actually know the answer. My question is about
> hooking up a Mirage amp to my IC7000. I found a model B-310G for $100
> shipped and figured for that price, I couldn't miss.
>
> So here is my problem. There are three connections on this unit. The SO239
> connectors are clearly marked for the radio and antenna. The third input is
> marked "Remote Keyer" and it appears to be a 3.5mm jack. Not wanting to mess
> anything up, I went to the Mirage web site to see what I was supposed to do
> with this. I downloaded the manual and discovered its a remote keyer port.
> I'm serious. That's all the manual says. There are no instructions on when
> this should be used.
>
> So the question is, do I need this? If I do, which port do I insert it into
> in the back of the IC7000? I have a keyer port and a "remote" port back
> there, both with 3.5mm jacks. Finally, will just a standard audio cable with
> two 3.5mm plugs work or do I need something else?
>
> I feel retarded for having to ask this. Its my first amp and I really don't
> want to mess anything up. I wish the manual gave a better description of how
> to hook up and use the unit.
>
> Steve
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|