I agree with Tom.
I find the drop out on SSB to be very annoying, so I prefer hard
keying. However, RF sensed keying will work if needed.
73
Dan
--
K9ZF /R no budget Rover ***QRP-l #1269
Check out the Rover Resource Page at: <http://www.qsl.net/n9rla>
List Administrator for: InHam+grid-loc+ham-books
Ask me how to join the Indiana Ham Mailing list!
Tom Carney wrote:
> John Geiger wrote:
>
>> Yes, the Mirage will do RF sensed keying, so there is
>> no reason you have to hard key the amp using this
>> jack.
>>
>> 73s John AA5JG
>>
>>
>
> While it will work fine with RF sensed keying, I find that the relay
> will drop out during pauses of a SSB transmission. This drives me crazy
> so I use hard keying.
>
> I would try it with RF first keying and see if it works OK for you.
> You can always add hard keying later if needed.
>
> 73,
>
> Tom K6EU aka K6EU/r
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|