Hi Mike,
On Tue, Dec 9, 2014 at 11:11 AM, Mike & Coreen Smith VE9AA <
ve9aa@nbnet.nb.ca> wrote:
>
> I made a tool for installing radials in my VERY rocky soil
You have my attention, since my soil also has lots of rocks. You don't have
a photo, do you?
I have elevated radials under my inverted-L, but I would like to bury a few
radials again at each end of my Beverages, so that I can have the
neighbor's cows come in here and cut the grass and weeds. When they were
grazing once, they tore some radials loose that I had stapled to the earth
with their teeth.
The following year I just laid the wire on the ground (tightly), pinned it
> down here and there with small homemade staples
>
Staples here usually hit rocks and bend, and take numerous tries. Perhaps
the rocks in my soil are closer together than yours.
Also, since you live in NB, I don't suppose you could try and help find
that QRM source on 1.915 could you?
73, Mike
www.w0btu.com
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|