That might get you close but it’s also dangerous if something is getting ready
to let go. There are more accurate and safer ways.
Ty K3MM
Sent from the all new AOL app for iOS
On Thursday, October 20, 2022, 2:20 AM, maflukey@gmail.com wrote:
Just wanted to reiterate Jim's advice and share a story... Years ago, my Elmer
showed me how to use a small cheap AM transistor radio (seems that lower
quality ones seem to work best) to locate line noise. We walked the
neighborhood and he used the radio to locate suspect poles which were making a
60 HZ buzzing sound. He carried this small "battering ram" with him to knock
the suspect poles at the base while listening on the AM radio. I believe it
was just a piece of pipe with handles welded on it. If there was something
awry on the pole we could hear the buzzing break into static crashes on the AM
as he struck the pole with the ram. Right or wrong, it proved to be a rather
effective technique. He located two problem poles in my neighborhood in short
order, showed me how to get the pole numbers, and I called them into the power
company. They came our promptly and fixed whatever it was that needed
fixing, and actually sent me a thankyou letter for letting them know th
ey had problems.
Good hunting!
73
Matt
KM5VI
>> A good test is take a small AM transistor radio to the property your
looking at and give a listen to a weak station or or even a blank
frequency on the AM band and see what you hear.
As said before here, I had more issues with the 7600 V distribution
lines than I did with the transmission line.
Thanks, 73, Jim W7RY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|