TenTec
[Top] [All Lists]

Re: [TenTec] Question....way out there.....

To: tentec@contesting.com
Subject: Re: [TenTec] Question....way out there.....
From: Ron Notarius W3WN <wn3vaw@verizon.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 12 Feb 2016 08:30:26 -0600 (CST)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Pepe,
 
There are many others on the reflector who could give a more detailed and 
accurate answer... but the simple answer is "Yes."


Although it may be more like "Yes, but..."


Yes, the company is open for business and is busy right now.
But, they are still gearing up some things due to the... circumstances during 
the later half of 2015 and it's effects on the operation, under the previous 
ownership/management.


The new ownership has asked for some patience as everything is coming back.  
Again, I don't know all the details and I don't want to speculate, but clearly, 
some things were done that must now be undone.  Neither of which could happen 
overnight.


All we can do is be patient.  I know it's tough... I for one am anxiously 
awaiting the return of the Omni VII to production (even if it is as the O7+) so 
that I can acquire something for mine.  The wait can be frustrating, but all we 
can do right now is wait.


Hang in there!


73, ron w3wn

On 02/12/16, Jose F Ballester wrote:

Is TenTec open for business? Don’t see much at all in their home page except 
prices for service & repair, and future plans that don’t seem to materialize.

73 de Pepe WP3HW



On Feb 12, 2016, at 8:35 AM, rick@dj0ip.de <Rick@DJ0IP.de> wrote:

Chas,

I'm sure if you listen to it on a separate receiver, you will find it is
chopping off the first dit, or at least a part of it. But the receiver
needs to be farther away so that it doesn't hear the QRP signal operating
into no antenna for the first 15ms.

From the instant RF hits the 405, it still takes about 15mS for the relay
to switch.

With 3w, not much will happen to the relay contact.
If it were switching 100w, you would soon burn the contacts. 

73 - Rick, DJ0IP
(Nr. Frankfurt, Germany)



-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of ChasW3KC
Sent: Thursday, February 11, 2016 11:27 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Question....way out there.....

Hi John-

I use the vintage TT 405 amp often with my TT 539.
It works great if you accept that the combo is not quite full QSK (the 405
T/R delay can be adjusted down to what I would call "semi break-in").
The Argo VI is a fine little radio.

73 Chas W3KC

----- Original Message -----
From: "John Farler" <k4avx1@windstream.net>
To: <tentec@contesting.com>
Sent: Thursday, February 11, 2016 4:39 PM
Subject: [TenTec] Question....way out there.....


> I've become an owner of the TT Argo VI, as a gift from the local
> radio club for somethings I did during my ham lifetime.
> The situation is: I want to use it at times with the old, old
> 50 watt amplifier that TT made to go with the Argo 509.

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>