--part1_55.165ef97f.2849d0e8_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Don't do it ! Unless the power transformer is rated for 50 Hz operation it
will most likely overheat or burn up. 73 Todd Roberts WD4NGG .
--part1_55.165ef97f.2849d0e8_boundary
Content-Type: message/rfc822
Content-Disposition: inline
Return-Path: <owner-amps@contesting.com>
Received: from rly-za04.mx.aol.com (rly-za04.mail.aol.com [172.31.36.100]) by
air-za05.mail.aol.com (v77_r1.36) with ESMTP; Sat, 02 Jun 2001 01:05:09 2000
Received: from contesting.com (dayton.akorn.net [216.1.128.73]) by
rly-za04.mx.aol.com (v77_r1.36) with ESMTP; Sat, 02 Jun 2001 01:04:47 -0400
Received: from dayton.akorn.net (dayton.akorn.net [216.1.128.73])
by contesting.com (8.11.2/8.11.2) with SMTP id f5254jW01640;
Sat, 2 Jun 2001 01:04:45 -0400
Received: by dayton.akorn.net (TLB v0.10a (1.23 tibbs 1997/01/09 00:29:32));
Sat, 02 Jun 2001 01:04:38 -0400 (EDT)
Message-ID: <3B18738D.9D15D106@fast.net>
To: <amps@contesting.com>
Date: Sat, 02 Jun 2001 01:03:10 -0400
From: "A.AIMETTE" <w2ox@fast.net>
Reply-To: w2ox@pop.fast.net
X-Mailer: Mozilla 4.02 [en]C-DIAL (Win95; U)
MIME-Version: 1.0
To: AMPS REFLECTOR <amps@contesting.com>
Subject: [AMPS] 50~ vs 60~ ???
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-amps@contesting.com
Precedence: bulk
X-Sponsor: W4AN, KM3T, N5KO & AD1C
This may be a well known topic, but not to me!
What happens when you operate a USA 60~ hi power amp on 50~? Does the
filament voltage change? B+ voltage changes?
any info would be helpful? thanks again alex w2ox/v47kp
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
--part1_55.165ef97f.2849d0e8_boundary--
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|