Amps
[Top] [All Lists]

Re: [Amps] RE : who needs it? Henry 8K

To: "'Bill Fuqua'" <wlfuqu00@uky.edu>,"'Bill Coleman'" <aa4lr@arrl.net>, "'Amps'" <amps@contesting.com>
Subject: Re: [Amps] RE : who needs it? Henry 8K
From: "Administrator" <amps@myrealbox.com>
Date: Thu, 25 May 2006 12:06:19 -0400
List-post: <mailto:amps@contesting.com>
This thread is OVER.  I have asked nicely once any further 
posts on this topic will result in the posters being removed 
from the list. 

73, 

   ... Administrator 
       amps@contesting.com 
 



> -----Original Message-----
> From: amps-bounces@contesting.com 
> [mailto:amps-bounces@contesting.com] On Behalf Of Bill Fuqua
> Sent: Thursday, May 25, 2006 10:58 AM
> To: Bill Coleman; Amps
> Subject: Re: [Amps] RE : who needs it? Henry 8K
> 
> 
> 
> 
> 
> At 11:16 PM 5/24/2006 -0400, you wrote:
> 
> But does anyone other than a complete nut
> exceed those speeds by 50%? 100%? 200%?
> 
>          Above about 50 MPH the power required is 
> proportional to the speed 
> cubed! 100% increase ,say 50 to 100 MPH ,requires 8 times as 
> much power 200 
> % increase 50 to 150 MPH 27 times as much horse power.  A 26% 
> increase in 
> speed amounts to a doubling of power.
> 
> The engine of a car traveling at a speed of 75 MPH is 
> producing about 2.5 
> times than it would at 55 MPH. So that is like running almost 
> 4kW instead 
> of 1.5 kW.
> 
> 73
> Bill wa4lav
> 
> 
> 
> 73
> Bill wa4lav
> 
> 
> >Bill Coleman, AA4LR, PP-ASEL        Mail: aa4lr@arrl.net
> >Quote: "Not within a thousand years will man ever fly!"
> >              -- Wilbur Wright, 1901
> >
> >_______________________________________________
> >Amps mailing list
> >Amps@contesting.com
> >http://lists.contesting.com/mailman/listinfo/amps
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>