Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tack welding rebar, need howto

To: Jim Lux <jimlux@earthlink.net>
Subject: Re: [TowerTalk] Tack welding rebar, need howto
From: Tom Anderson <andersonww5l@sbcglobal.net>
Reply-to: Tom Anderson <andersonww5l@sbcglobal.net>
Date: Fri, 3 Jan 2014 11:25:07 -0800 (PST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Jim:

I used the "wire" that is supposed to be used with rebar and no problems in 18 
years on my TriEx W51 tower.  Of course I always exceed the specs for 
concrete.  instead of 3x3x4, I go 4x4x6.  Gives me a little extra safety.   
Also my current base is what they call "6 sack mix" supposedly the same mixture 
they use on Interstate Highway bridges.   I've got extra rebar wired all over 
the base as an added safety measure, but  not too much as to be overdoing it.


Tom, WW5L 


>________________________________
> From: Jim Lux <jimlux@earthlink.net>
>To: towertalk@contesting.com 
>Sent: Friday, January 3, 2014 12:41 PM
>Subject: Re: [TowerTalk] Tack welding rebar, need howto
>  
>
>On 1/3/14 9:54 AM, Richard (Rick) Karlquist wrote:
>
>> The rebar drawings never show these diagonals,
>> so I haven't used them in the past.  But this
>> sounds like a great idea in the future.  There
>> is no rule saying you can't put gratuitous
>> rebar in the hole.
>>
>At least until there's no room for the concrete<grin>
>
>
>
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>    
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>