VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] A suggestion for ERP-based Entry Classes

To: VHFContesting eMail Remailer <VHFcontesting@contesting.com>
Subject: Re: [VHFcontesting] A suggestion for ERP-based Entry Classes
From: "Ev Tupis (W2EV)" <w2ev@arrl.net>
Date: Sun, 14 Dec 2003 14:58:01 -0500
List-post: <mailto:vhfcontesting@contesting.com>
Dana Rawding asked:
> 1) How do you account for a log periodic?

Easy...how many elements were you USING?  Multi-band L-P's are typically viewed
as 3-element beams, right?  The "most resonant element" + the "one behind and
one in front" is the rule of thumb.

> 2) Say at my home station I run 110 elements on 1296 MHZ w/ 100W, but
> only 5 elements on 50 MHz with 150W and 13 el on 144 MHZ with 150W.

Easy...the ARRL rules already address this.  See "ARRL Rules for VHF Contests",
Rules 2.1.1.1 and 2.1.1.2.

> 3) How do yo account for dishes?

This will require a little thought (especially since it's also possible to use
feedhorns, etc).  But this seems like a minor wrinkly.  The base-concept is
sound.

> 4) Feed lines and preamp/transverter noise figures make a big
> difference.  Why should they not be included in the calculation?

Because it complicates things too much.  Keep it simple and give people some
wiggle-room in how they choose to participate and compete.

2x 13-element beams and 160 watts puts me in the High Power class.  Do I want to
piddle it away with RG-58/u or will I feed my antenna with LDF7-50?

Regards,
Ev Tupis,W2EV

-- 
PropNET: If the band is open and no one is TXing, does anyone hear it?
HamIM  : Messaging the all-ham way, find Rovers as they go to play.
         That HamIM, that HamIM -- I'm sure you'll like that HamIM.
----------------------------------------------------------------------
Ask me about either.  I'll send a URL and you can join the fun, too!

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>