On Mon,3/20/2017 2:04 PM, Carl wrote:
Yes, remember that it's perfectly OK to run a 120V load between one
side of the TX primary and its center tap. This is often done by the
first rate amp mfrs. And remember that it is NOT OK (and is illegal)
to run a 120V load between one side of the line and ground. Indeed,
putting load current on ground is a recipe for hum pickup. And
bonding neutral to ground is even worse.
73, Jim K9YC
Except those high enders that went to ground
I don't understand what you mean, Carl.
73, Jim
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|