RTTY
[Top] [All Lists]

Re: [RTTY] SO2R vs. SO1R - a pertinent question

To: Barry <w2up@mindspring.com>
Subject: Re: [RTTY] SO2R vs. SO1R - a pertinent question
From: Bill Turner <dezrat@copper.net>
Reply-to: dezrat@copper.net
Date: Mon, 24 Jul 2006 20:39:20 -0700
List-post: <mailto:rtty@contesting.com>
ORIGINAL MESSAGE:

On Tue, 25 Jul 2006 01:51:14 +0000, you wrote:


> When CQing using VFO A, while 
>in rcve, I would tune VFO B looking for new stations and mults on the 
>same band.  In between CQs, when the timing was just right, I'd hit the 
>SPLIT button, drop my call in on the VFO B freq, and work the guy.  
>Then, go back to CQing on VFO A.  In essence, I was running on one freq. 
>and S&Ping on another, on the same band, all with one radio. 

------------ REPLY SEPARATOR ------------

Nope, that's two radios in one box. Like others, you are confusing the
number of radios with the number of boxes.

Definition of one radio: When the TX is on the RX must be off and vice
versa.

Bill, W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>