RTTY
[Top] [All Lists]

Re: [RTTY] QRL?

To: rtty@contesting.com
Subject: Re: [RTTY] QRL?
From: John <jlockj@earthlink.net>
Date: Sun, 27 Mar 2016 14:14:20 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>

I believe sending a short QRL message is the courteous thing to do before sending a longer CQ message. There have been many times I've waited 20 seconds on a "clear" frequency before sending QRL and had a station come back on or near the frequency.

As far as how long to wait on a quiet frequency before sending QRL, I suggest:

10 seconds      If both stations on the freq are SO1R and conscious
20 seconds      If either station on the freq are SO2R (just in
                case)
30 seconds      If the station running on the freq is SO1R/SO2R
                and is copying a station sending a brag tape
40 seconds      If the station running on the freq is SO1R/SO2R
                and is trying to work a mult up the band
60 seconds      If the station running on the freq is filling their
                emergency relief bottle
1 min 30 sec    It the station is rebooting their locked-up computer
2 minutes       If the station running on the freq is over 60 and
                filling their emergency relief bottle
2 days          If the run station is involuntarily upgrading to
                Windows 10

I'm leaving up to ED to make a chart for SO3R times.  ; )

Happy Easter!

John  W0DC

---------------------------------------------------------------

On 3/27/2016 12:37 PM, Ed Muns wrote:
QRL? may give the sender a warm, self-righteous feeling, but it does little
to politely determine if a frequency is in use.  When I hear "QRL?" on my
run frequency it is almost always at a time when I'm struggling to copy the
exchange of a weak station.  (Otherwise, I'd be transmitting.)  The last
thing I need to do is answer the QRL? query and further QRM the station I'm
trying to copy.

Sending "QRL?" means that the station did not listen long enough and has
decided to risk QRMing an ongoing QSO rather than be patient.  He might as
well just starting calling CQ.

The best way to determine if a frequency is in use is to listen a long
enough time to account for the possibility that half of the on-going QSO is
not apparent to you.

Those with a sufficient waterfall history don't have to listen as long, but
the goal is the same: a quiet frequency for a sufficiently long period.

Ed W0YK

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>