The frequency display is most likely another deOxit session for pins of
connectors of the display board, display driver, counter, time base, etc. no
adjustments or re-soldering unless the display or display driver board has been
damaged by placing connectors on the wrong pins.
73,
Gary - AB9M
--------------------------------------------------
From: "g p" <n2wjw@yahoo.com>
Sent: Saturday, January 16, 2010 6:13 PM
To: <tentec@contesting.com>
Subject: [TenTec] Corsair AGC problem
> Spent a little more time with the Corsair today and noticed an intermittent
> AGC and found some components with loose soldering joints in the IF AF board,
> re-soldered them, got some deOxit for the controls and all is fine now, great
> receive on this rig, this old rig is slowly coming back to life
>
> Now for the next headache and hopefully the last....the frequency display,
> that's another posting.
>
> Thanks to all that helped out on and off the TT archives.
>
> Gil
>
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|