sometimes just when you think you have hit the bottom of the tower, the
miraculous happens.
spent 3 hours visiting my son, taking him out to dinner and getting
things for dinner tomorrow.
came home, did a test transmission with MMTTY on my 480sat into a dummy
load. all was well.
Fired up Writelog, tested it and got a boat load of port not available
messages. Thought it might be time to re-boot this laptop. This laptop
takes about 30 minutes to fully reboot.
Fired up Writelog. Now the darn thing is working just like it
should...nice diddles and full FSK.
note to self. if you use MMTTY for general communications, you need to
reboot the computer before running Writelog if they are set up the exact
same way.
A review. Rigexpert TI-8 Virtual Ports...
CAT = Com2
PTT = Com7
FSK = Com9
no EXTFSK or anything.
--
73
Thom KI8W
"Living deep in the black hole of RF"
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|