Ok more testing, - 1 thing to mention is that in every case of this, the
unit w/ the 100mw card is Karlnet v4.02 and the other unit (ap or cpe) is
version 3.79 or 3.88
Put a 100mw card into AP running v4.02, same thing!!!!
http://wirelessbroadbandsystems.hypermart.net/100mwAP.htm
Dan Metcalf
Wireless Broadband Systems
dan.metcalf@wbsysnet.com
781-658-2075
www.wirelessbroadbandsystems.com
-----Original Message-----
From: Dan Metcalf [mailto:danm@suncorstainless.com]
Sent: Saturday, June 15, 2002 9:22 PM
To: 'karlnet@WISPNotes.com'
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
Strange, very strange, its only a 1.5mile link, and its LOS and all the
connections are good, everything is good
Dan Metcalf
Wireless Broadband Systems
dan.metcalf@wbsysnet.com
781-658-2075
www.wirelessbroadbandsystems.com
-----Original Message-----
From: Norm Young [mailto:npyoung@applegatebroadband.net]
Sent: Saturday, June 15, 2002 9:17 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
The link seemed solid...however, sometimes the reported S/N ratio would drop
below 0 and the link would just quit. I suppose the code in Karlnet looks
for this situation and drops the link...even though it may be just a signal
strength reporting problem from the PRISM II card and does not reflect the
reality, which is a good solid signal. However, a dropped link, whether
from bogus signal strength reporting or a real sig. problem is still a
dropped link. What is a real question to me is why the card seems to
work so well in my PtP link. I further checked my notes, and the reported
signal strength at the AP-1000 in the PtP slot with the Orinoco card in and
then with the 100mW PRISM II card substituted was the same. So, no problem
with reporting sig. strength in that slot. Very strange.
Norm
----- Original Message -----
From: "Dan Metcalf" <danm@suncorstainless.com>
To: <karlnet@WISPNotes.com>
Sent: Saturday, June 15, 2002 5:43 PM
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
> I just did a ping fill test and its receiving 3.5 to 4.5 Mbps so there is
> something wrong in how Karlnet is seeing the signals I think
>
> Dan Metcalf
> Wireless Broadband Systems
> dan.metcalf@wbsysnet.com
> 781-658-2075
> www.wirelessbroadbandsystems.com
>
> -----Original Message-----
> From: Norm Young [mailto:npyoung@applegatebroadband.net]
> Sent: Saturday, June 15, 2002 8:21 PM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
>
> Checked my notes, Dan, and I was seeing about a 20dB difference between
> remote and local signals with the 100mW card loaded in the PtMP slot.
>
> Norm
>
> ----- Original Message -----
> From: "Norm Young" <npyoung@applegatebroadband.net>
> To: <karlnet@WISPNotes.com>
> Sent: Saturday, June 15, 2002 5:11 PM
> Subject: Re: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
>
>
> > Oh yeah, that picture looks very familiar. I'll check my notes to see
if
> > the asymmetry of 17 dB is about what I was seeing....
> >
> > Norm
> >
> > ----- Original Message -----
> > From: "Dan Metcalf" <danm@suncorstainless.com>
> > To: <karlnet@WISPNotes.com>
> > Sent: Saturday, June 15, 2002 3:45 PM
> > Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
> >
> >
> > > Here is a picture from the AP doing a wireless link test
> > >
> > > http://wirelessbroadbandsystems.hypermart.net/100mw.htm
> > >
> > >
> > >
> > > Dan Metcalf
> > > Wireless Broadband Systems
> > > dan.metcalf@wbsysnet.com
> > > 781-658-2075
> > > www.wirelessbroadbandsystems.com
> > >
> > > -----Original Message-----
> > > From: Dan Metcalf [mailto:danm@suncorstainless.com]
> > > Sent: Saturday, June 15, 2002 6:24 PM
> > > To: 'karlnet@WISPNotes.com'
> > > Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
> > >
> > >
> > > I just setup a cpe running Karlnet v4.02 and a 100mw card, the user is
> > able
> > > to access the internet and the speeds are great.
> > >
> > > However, there are two issue's, I can't ping/manage the unit from my
> home
> > > office and when I do signal stats it shows -94 signal on the cpe side,
> > ( -60
> > > at the ap).
> > >
> > > Anybody have any ideas? Our network is bridged ( for now ) and all the
> > > cpe's/ap's are on a 192.168.x.x subnet while the pc's and routers are
on
> > > public ip's
> > >
> > > Dan Metcalf
> > > Wireless Broadband Systems
> > > dan.metcalf@wbsysnet.com
> > > 781-658-2075
> > > www.wirelessbroadbandsystems.com
> > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|