Mel
I don't know if Orinoco's new code is the same one that Karlnet released
if it is then yes but I am not sure why Orinoco would want standard
Prism 2/2.5 drivers to be in there version. We have only been using the
Karlnet releases from day one.
Kevin / Doug can you chime in on this one?
Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Melvin C. Etheridge
Sent: Sunday, June 23, 2002 9:19 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] COR/ROR Mode??? was - AP1000 with non-lucent
cards
OK....If I am running ROR/COR ver 4.14 in COR/ROR mode not 802.11b will
it support the higher output cards???
Mel
----- Original Message -----
From: "Tony " <tonylist@wwwbiz.com>
To: <karlnet@WISPNotes.com>
Sent: Sunday, June 23, 2002 2:29 PM
Subject: RE: [Karlnet] AP1000 with non-lucent cards
> Dan
>
> Unless he as a new version none of the Prism 2.0 or 2.5 cards we have
> work in SEC mode. I think his comment where talking at TC mode and the
> power issues.
>
> Sincerely
> Tony Morella
> Demarc Technology Group
> Office: 908-996-7995
> Cell: 908-246-9170
> Fax: 908-847-0202
> email: tony@demarctech.com
> http://www.demarctech.com
> Wireless Solution Provider
>
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
> On Behalf Of Dan Metcalf
> Sent: Friday, June 21, 2002 8:41 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] AP1000 with non-lucent cards
>
>
> Tony,
>
> Can we clarify what DOUG said? I thought he said the prism 2.0 cards
> DO NOT work and the PRISM 2.5 cards do work (100 & 200mw)?
>
>
>
> Dan Metcalf
> Wireless Broadband Sytems
> dan.metcalf@wbsysnet.com
> www.wirelessbroadbandsystems.com
>
>
>
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com
> > [mailto:karlnet-admin@WISPNotes.com]
> On
> > Behalf Of Tony
> > Sent: Friday, June 21, 2002 8:06 PM
> > To: karlnet@WISPNotes.com
> > Subject: RE: [Karlnet] AP1000 with non-lucent cards
> >
> > Larry
> >
> > Your request is for SEC which is not an option under the prism
> > cards, SEC only works for Orinoco cards.
> >
> > Sincerely
> > Tony Morella
> > Demarc Technology Group
> > Office: 908-996-7995
> > Cell: 908-246-9170
> > Fax: 908-847-0202
> > email: tony@demarctech.com
> > http://www.demarctech.com
> > Wireless Solution Provider
> >
> >
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com
> > [mailto:karlnet-admin@WISPNotes.com]
> > On Behalf Of Larry Yunker
> > Sent: Friday, June 21, 2002 4:33 PM
> > To: karlnet@WISPNotes.com
> > Subject: RE: [Karlnet] AP1000 with non-lucent cards
> >
> >
> > Hmm... I could have sworn that there were a few guys that had the
> > AP-1000's running in Turbocell mode with the prism cards.
> >
> > Here is what I need:
> >
> > Some sort of hardware suitable for tower mounting (lightweight,
> weather
> > resistant, Power-over-ethernet, etc, etc)
> >
> > Karlnet SEC BASE
> > three 100mw Cards (to run 3 sector antennas)
> > one standard 35mw Lucent Silver/Gold Card (to run backhaul to NOC
> > cross-polarized and 25ft vertical separation from the sectors)
> >
> > Does anyone market a 4-PCMCIA-slot SBC's with Karlnet firmware? Or
> > maybe I'll just need to get two 2-PCMCIA slot SBC's with Karlnet.
> >
> > Anyway... if Karlnet has any suggestions or if any vendors would
> > like
> to
> > contact me off-list, I'm looking for a solution!
> >
> > Thanks,
> > Larry
> >
> >
> > ---------- Original Message ----------------------------------
> > From: "Support" <support@karlnet.com>
> > Reply-To: karlnet@WISPNotes.com
> > Date: Fri, 21 Jun 2002 15:47:59 -0400
> >
> > >The higher output radios don't work in the AP-1000. The hardware
> isn't
> >
> > >setup to handle the power.
> > >
> > >Doug Harman
> > >KarlNet, Inc.
> > >525 Metro Place North
> > >Suite 100
> > >Dublin, OH 43017
> > >614 822-5275 x 123
> > >614 822-0024 fax
> > >
> > >> -----Original Message-----
> > >> From: karlnet-admin@WISPNotes.com
> > >> [mailto:karlnet-admin@WISPNotes.com]On
> > >> Behalf Of Larry Yunker
> > >> Sent: Friday, June 21, 2002 11:25 AM
> > >> To: karlnet@WISPNotes.com
> > >> Subject: [Karlnet] AP1000 with non-lucent cards
> > >>
> > >>
> > >> Has anyone had any luck running the AP1000 in 802.11b mode with
> > >> non-lucent cards. I'm hoping to find a 100mw solution, but it
> > >> has
> to
> >
> > >> be 802.11b mode NOT Turbocell.
> > >>
> > >> Does the Karlnet SEC Base software let me do this?
> > >>
> > >>
> > >> _______________________________________________
> > >> Karlnet mailing list
> > >> Karlnet@WISPNotes.com
> > >> http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >>
> > >
> > >_______________________________________________
> > >Karlnet mailing list
> > >Karlnet@WISPNotes.com
> > >http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > ---
> > [This E-mail scanned for viruses by Declude Virus]
> >
>
>
>
> ---
> [This E-mail scanned for viruses by Declude Virus]
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|