Tim,
Thank you for the information. My port in the back is listed as a printer
port, (ECP?) LPT1 not a Com port? Will this work for communicating with the
OMNI VII+?
Best,
DW Holtman
WB7SSN
----- Original Message -----
From: "Tim Heasman" <tim@sideswiper.plus.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Sunday, January 18, 2009 8:15 AM
Subject: Re: [TenTec] Ham Radio Deluxe
> Hi,
>
> Go to control panel, select system, then device manager. The ports will
> be
> listed there along with the port numbers.
>
> 73
>
> Tim
> gm4lmh
>
>
> ----- Original Message -----
> From: "DW Holtman" <tubestuff@comcast.net>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Sunday, January 18, 2009 2:42 PM
> Subject: Re: [TenTec] Ham Radio Deluxe
>
>
>> Hello,
>>
>> Thank you to everyone who send suggestions and ideas to fix this problem,
>> especially Dell KI7XD for sending me a three page document from Ten Tec.
>> However, the problem is the same. I'm using a 25 db to 25 db cable. It is
>> wired correctly according to the manual and the document from Ten Tec.
>> The
>> only difference is the manual has some jumper wires on the PC side of the
>> plug. The document does not show the jumpers? What are they for? It is
>> wired:
>>
>> 2 to 2
>> 3 to 3
>> 7 to 7
>>
>> and jumpers on the PC end
>>
>> 4 to 5
>> 6 to 8 to 20.
>>
>> The document talks a built in diagnostic mode to trouble shoot
>> communication
>> problems. It is several years old making references to Windows 98 and
>> using
>> HyperTerminal to communicate. I will try this out I'm running XP.
>>
>> My computer has no 9 pin serial ports. It has one 25 pin serial port on
>> the
>> back (I assume it is serial port). How can I figure out if it is com 1 or
>> com 2 etc?
>>
>> Any more help or suggestions would be greatly appreciated. I hope this
>> makes
>> some sense, there are several items mentioned.
>>
>> Best,
>> DW Holtman
>> WB7SSN
>>
>>
>>
>> ----- Original Message -----
>> From: "DW Holtman" <tubestuff@comcast.net>
>> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
>> Sent: Friday, January 16, 2009 3:56 PM
>> Subject: [TenTec] Ham Radio Deluxe
>>
>>
>>> Hello,
>>>
>>> I recently aquired a Omni VI Plus and I wanted to know if anyone uses
>>> Ham
>>> Radio Deluxe with it. I cannot get it to communicate with my computer. I
>>> first tried using a DB-25 (Radio) to a DB 9 through a Belkin serial to
>>> USB
>>> adapter, no luck. Next I wired a DB-25 to DB-25 thinking this set up did
>>> not
>>> like the Balkin. Still no luck. I told HRD that I have a IC-735 as per
>>> the
>>> manual.
>>>
>>> Any ideas? Thank you in advance.
>>>
>>> Best,
>>> DW Holtman
>>> WB7SSN
>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|