On 10/20/2013 8:54 PM, Carl wrote:
All 3 of the Command Tech amps 1/2/3 tubes used a single toroid switched
for 40, 80, and 160 followed by the balun. It was the switched pi net
toroid that caused problems.
On the 6M amp they also use a balun.
When Palstar bought the line they went to 3 seperate toroids and kept
the balun.
Is Palstar still building amps?
73
Roger (K8RI)
Ive worked on several of all models from both companies and havent had a
balun problem but none were used for RTTY that Im aware of.
Carl
KM1H
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|