1996-June Archives by Date
Starting: Mon Jun 3 02:38:44 1996
Ending: Sun Jun 30 20:44:02 1996
Messages: 206
- Tower Block
David C. Patton
- Tower Block
Richard L. King
- 160M vertical
GLENN R. JOHNSON, M.D.
- Hello!
Tony Brock-Fisher
- 160M vertical
Bill Fisher
- 160M vertical
K7LXC@aol.com
- Hello!
K7LXC@aol.com
- Hello!
barry
- Hello!
Tony Brock-Fisher
- Hello!
K7LXC@aol.com
- Hello!
Mark Sihlanick
- Hello!
barry
- Phyllistran
Michauldin@aol.com
- Hello!
David Robbins
- Phyllistran
K7LXC@aol.com
- Field Day 40 Mtr ant
Gary D. Elliott
- rotating mast
William R Liporace
- Field Day 40 Mtr ant
Tony Brock-Fisher
- G-10 Fiberglass
GLENN R. JOHNSON, M.D.
- Hello!
K7LXC@aol.com
- Crank up
Alfred J. Frugoli, KE6BER/1
- Rohn shackles/T-Bars
AA7BG Matt Trott
- TOWER GROUNDING
by way of "Bill Fisher, KM9P"
- 40 Mtr FD Ant
Gary D. Elliott
- Rohn shackles/T-Bars
Tony Brock-Fisher
- Crank up
Alfred J. Frugoli, KE6BER/1
- Removing crankup tower from truck
Dick Dievendorff
- Concrete
Tim S. Ellam
- Concrete
K7LXC@aol.com
- Concrete
Tony Brock-Fisher
- Rohn shackles/T-Bars
sawyers
- Re[2]: Crank up
sawyers
- Concrete
sawyers
- Concrete
Keith Morehouse-WB9TIY
- Concrete
Tim S. Ellam
- CW Issue/new rig sales
K7LXC@aol.com
- CQ Contest Magazine - FREE
K7LXC@aol.com
- CQ Contest Magazine - FREE
AA7BG Matt Trott
- Grounding Near a Gas Line
Jay Pryor
- 3 versus 4 guys
Natan Huffman
- 2 element, 5-band Gem Quad (10, 12, 15, 17, 20M)
jim funk
- 3 versus 4 guys
K7LXC@aol.com
- 3 versus 4 guys
sawyers
- Excuse me, please.
AA7BG Matt Trott
- Grounding Near a Gas Line
Bill Hider
- Station Building
Bruce (AA8U)
- Test Message
Richard Thorne - WB5M
- [Fwd: Roof Mounted Antenna Farm]
Bruce (AA8U)
- [Fwd: Roof Mounted Antenna Farm]
Richard Thorne - WB5M
- TowerMate
Bill Fisher, KM9P
- Torque arms necessary?
Kris Mraz AA5UO
- Torque arms necessary?
K7LXC@aol.com
- [Fwd: Roof Mounted Antenna Farm]
K7LXC@aol.com
- Torque arms necessary?
Kris Mraz AA5UO
- Torque arms necessary?
Gary Schwartz
- Torque arms necessary?
K7LXC@aol.com
- Torque arms necessary?
Big Don
- hams are not alone with tower problems
Bill Frede
- Torque arms necessary?
Gary Schwartz
- dropping towers
ken smith
- dropping towers
Bruce (AA8U)
- Gin Pole
Patrick N. Riggins
- dropping towers
Roy Morgan
- Gin Pole
Ed Gilbert
- Gin Pole
K7LXC@aol.com
- 3 versus 4 guys
K7LXC@aol.com
- Rotating Tower
Dave_Raymond-CSUS04@email.mot.com
- Rotating Tower
Bruce (AA8U)
- Rotating Tower
David L. Thompson
- Rotating Tower
Jay O'Brien - W6GO
- Tower Crew Needed
Sid Leach
- Ring Rotators
Chris Swallow
- Rohn Thrust Bearings
Ralph Fedor
- online
Bruce (AA8U)
- Rohn Thrust Bearings
Tony Brock-Fisher
- Rohn Thrust Bearings
K7LXC@aol.com
- Rohn Thrust Bearings
Kris Mraz AA5UO
- Rohn Thrust Bearings
Jim Hollenback
- Loaded tower for lowband
Torfinn Utne
- Thrust bearings
Gary Nieborsky
- 160 Meters
Lee Buller
- Delta Loop
Gary D. Elliott
- Rotating Tower
David & Barbara Leeson
- Bolt Book
David & Barbara Leeson
- EZWAY TOWER
Ron Goldstein
- Thrust bearings
Pete Smith
- Delta Loop
Tony Brock-Fisher
- Rohn Thrust Bearings
John D. Allen
- Delta Loop
Charlie Ocker
- Thrust bearings
K8DO@aol.com
- side mounts
Gary Nieborsky
- unscribe
Stanley Barczak
- 3 versus 4 guys
Stan Griffiths
- Masts and stacking considerations
Del Seay
- Masts and stacking considerations
Tony Brock-Fisher
- Masts and stacking considerations
Bryan Sparrowhawk
- Masts and stacking considerations
K7LXC@aol.com
- Masts and stacking considerations
Tony Brock-Fisher
- Masts and stacking considerations
barry
- Masts and stacking considerations
a. kerner
- side mounts
Gary Nieborsky
- cleaning aluminum wire?
Robert Hill
- Masts and stacking considerations
Kris Mraz AA5UO
- Physical size of Rohn towers ?
Tom Rune Lauknes
- LM-470
PAUL M. PLAYFORD
- Masts and stacking considerations
Floyd Gerald
- 40-2CD and modelling in EZNEC?
Walt Kornienko
- Masts and stacking considerations
Stan Griffiths
- Masts and stacking considerations
Stan Griffiths
- Tower and antenna info please
K8MBH@aol.com
- HY-GAIN ROTOR
Frank Donovan
- antennas and feedline
jrob@epix.net
- "Ugly-as-L" DXpedition Antenna
Bruce (AA8U)
- side mounts
Mark Sihlanick
- 40-2CD and modelling in EZNEC?
Mark Sihlanick
- antennas and feedline
ken smith
- HY-GAIN ROTOR
Frank Donovan
- MA-550 Tower Installation
Lanny Rathert
- Sommer XP707/807 information
K8MBH@aol.com
- MA-550 Tower Installation
Lanny Rathert
- Tower and antenna info please
Stan Griffiths
- Guy Wire questions
Charlie Ocker
- TopBand: "Ugly-as-L" DXpedition Antenna
Bruce (AA8U)
- MA-550 Tower Installation
Lanny Rathert
- Guy Wire questions
K7LXC@aol.com
- Guy Wire questions
Mike Bragassa, AA5NK:
- Mast support
Chris R. Burger
- Mast support
Kris Mraz AA5UO
- Guy Wire questions
Del Seay
- Guy Wire questions
Gary Nieborsky
- Guy Wire questions
K7LXC@aol.com
- strandvise clamps
David Clemons
- Guy Wire questions
Glenn D. O'Donnell
- Mast support
Glenn D. O'Donnell
- Removing Potting Compound
Bill Fisher, KM9P
- K6RR Concentric Mast Design (was: Mast support)
Frank Donovan
- Big, heavy mast
K7LXC@aol.com
- Insulated Guys
Roger D. Johnson
- Tower pictures wanted!
gaetano.piscopo@pixel.stt.it
- New Thread
K7LXC@aol.com
- Rotator info wanted
K7LXC@aol.com
- QUESTION
K7LXC@aol.com
- Co-locating hf yagi and sat antennas
Eric Rosenberg
- Big, heavy mast
David L. Thompson
- Rotor Information
grhosler1@mmm.com
- Antenna Erection
grhosler1@mmm.com
- Rotator info wanted
Dave LeDuc
- Big, heavy mast
sawyers
- Big, heavy mast
K7LXC@aol.com
- More tramming advice
K7LXC@aol.com
- Antenna Erection
K7LXC@aol.com
- Guy Wire questions
BK1ZX70SFL@aol.com
- New Thread
Pete Smith
- Ginpole
Steve Zettel
- Tensioning guys & keeping plumb
Walt Kornienko
- Tensioning guys & keeping plumb
Steve Zettel
- Guy Wire questions
K7LXC@aol.com
- Ginpole
K7LXC@aol.com
- Tensioning guys & keeping plumb
K7LXC@aol.com
- Tensioning guys & keeping plumb
Tom Lindtveit
- Insulated Guys
John A. Ross, IV
- Tramming
David & Barbara Leeson
- tramming etc.
Gary Nieborsky
- Tensioning guys & keeping plumb
K7LXC@aol.com
- Re[4]: Big, heavy mast
sawyers
- Parts for Create rotator box
Dave LeDuc
- tramming etc.
Robert E. Naumann
- Big, heavy mast
Stan Griffiths
- Insulated Guys
Stan Griffiths
- New Thread - Tram line missing link
BK1ZX70SFL@aol.com
- Tramming
Rattmann
- New Thread - Tram line missing link
K7LXC@aol.com
- New Thread - Tram line missing link
David Robbins
- More tramming advice
Stan Griffiths
- masts
Rich L. Boyd
- Insurance Claim Help
Eric Rosenberg
- Phased Vertical info
Richard Solomon
- Phased Vertical info
Tony Brock-Fisher
- masts
K7LXC@aol.com
- Insurance Claim Help
K7LXC@aol.com
- More tramming advice
K8DO@aol.com
- More tramming advice
K7LXC@aol.com
- masts
John A. Ross, IV
- Thanks for Insurance Info!
Eric Rosenberg
- Stealthy Antenna Colors
Jay Pryor
- masts
Darrel Van Buer
- HQ-1 MINI-QUAD
Bob Bell
- HQ-1 MINI-QUAD
Tony Brock-Fisher
- HQ-1 MINI-QUAD -Reply
PAT DOYLE
- HQ-1 MINI-QUAD
K7LXC@aol.com
- HQ-1 MINI-QUAD
Bob Bell
- HQ-1 MINI-QUAD
Dick Bodine
- HQ-1 MINI-QUAD
Gary Schwartz
- Hygain 52' Crankup - good for me?
Scott Neader
- Hygain 52' Crankup - good for me?
Bill Hider
- Hygain 52' Crankup - good for me?
Bill Hider
- Hygain 52' Crankup - good for me?
JKAHRS@delphi.com
- Hygain 52' Crankup - good for me?
Robert E. Naumann
- Hygain 52' Crankup - good for me?
Del & Jan Seay
- DSP Box (JPS NIR-10)
Gary D. Elliott
- yaesu g-xxxx rotor control
David Robbins
- Where do I put the rotor?
Tom Wagner
- Where do I put the rotor?
gtaft@voyager.net
- Where do I put the rotor?
Tom Wagner
- Where do I put the rotor?
gtaft@voyager.net
- Ring Rotors
Alberto Perello
Last message date:
Sun Jun 30 20:44:02 1996
Archived on: Wed Mar 6 11:48:34 2002
This archive was generated by
Pipermail 0.05 (Mailman edition).