Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

October 31, 2012

Re: [TowerTalk] Coax Matching Stubs W/Smith Chart, Martin Sole, 23:27
Re: [TowerTalk] Coax Matching Stubs W/Smith Chart, Bob K6UJ, 23:20
Re: [TowerTalk] Coax Matching Stubs W/Smith Chart, Martin Sole, 23:17
Re: [TowerTalk] Coax Matching Stubs W/Smith Chart, Bob K6UJ, 23:14
[TowerTalk] 43 feet pole for vertical, Hans Hammarquist, 23:00
Re: [TowerTalk] Coax Matching Stubs W/Smith Chart, Jerry Gardner, 22:48
[TowerTalk] Coax Matching Stubs W/Smith Chart, Bob K6UJ, 17:55
Re: [TowerTalk] Another rope question ??, Grant Saviers, 16:01
[TowerTalk] rotation limiter lever, Peter Helder, 09:21
Re: [TowerTalk] Guy Rope Knot, Tõnno Vähk, 06:37

October 30, 2012

[TowerTalk] Andrew Heliax connectors for sale, mikflathead, 16:16

October 29, 2012

[TowerTalk] Rotor question, Gregg Seidl, 20:03
Re: [TowerTalk] Another rope question ??, K8RI, 18:40
Re: [TowerTalk] Another rope question ??, Rick Karlquist, 17:48
[TowerTalk] Strength of chrome moly, Andrew J. Buckler (BBMSC), 17:07
Re: [TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m (reply), David Gilbert, 14:36
Re: [TowerTalk] Another rope question ??, Gene Fuller, 12:05
[TowerTalk] TEMPERATURE COMPENSATED GUY WIRE TENSION FORMULA, De La Vega, Fernando, 11:44
Re: [TowerTalk] Another rope question ??, Grant Saviers, 11:15
Re: [TowerTalk] Another rope question ??, K1TTT, 09:28
[TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m (reply), Scott Yost, 07:55
[TowerTalk] (no subject), Jon Knodel, 07:52
[TowerTalk] Another rope question ??, Gerard Jendraszkiewicz, 07:49
Re: [TowerTalk] Guy Rope Knot, K1TTT, 07:01

October 28, 2012

Re: [TowerTalk] Guy Rope Knot, John Hudson, 23:29
Re: [TowerTalk] Guy Rope Knot, Missouri Guy, 22:11
Re: [TowerTalk] Guy Rope Knot, Mark Stennett, 21:20
Re: [TowerTalk] Guy Rope Knot, EZ Rhino, 21:09
[TowerTalk] Guy Rope Knot, Kelley Shaddrick, 21:05
Re: [TowerTalk] AS455G rotor plate stuck in tower section...., Rob Frohne, 18:55
Re: [TowerTalk] AS455G rotor plate stuck in tower section...., K8RI, 17:09
[TowerTalk] AS455G rotor plate stuck in tower section...., Rob Frohne, 16:26
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, Jim Brown, 11:38

October 27, 2012

Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, K8RI, 13:15
Re: [TowerTalk] Calibrating antenna direction and using chokes witha beam, Jim W7RY, 00:23
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, RMorris, 00:06

October 26, 2012

Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, Jim W7RY, 23:49
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, Ron W8RJL, 17:26
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, K8RI, 14:00
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, K8RI, 13:53
Re: [TowerTalk] Calibrating antenna direction and using chokes with abeam, Gene Fuller, 10:03
Re: [TowerTalk] Common-mode choke for remote tuner, RMorris, 08:37
Re: [TowerTalk] Common-mode choke for remote tuner, Jim Lux, 07:36
[TowerTalk] Common-mode choke for remote tuner, Phil Zminda, 05:49
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, Bob K6UJ, 01:06
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, Ron W8RJL, 00:42
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, Rick Kiessig, 00:12

October 25, 2012

[TowerTalk] Rohn 45g, Jim Thomson, 23:52
Re: [TowerTalk] Calibrating antenna direction and using chokes witha beam, Pete Raymond, 23:47
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, K8RI, 22:41
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, Dan Hearn, 21:46
Re: [TowerTalk] Calibrating antenna direction and using chokes with a beam, Mike, 20:58
[TowerTalk] Calibrating antenna direction and using chokes with a beam, Rick Kiessig, 20:04
Re: [TowerTalk] Rohn 45g, Marshall Stewart, 17:05
Re: [TowerTalk] Rohn 45g, K8RI, 16:10
Re: [TowerTalk] Rohn 45g, Larry Melby, 15:47
Re: [TowerTalk] Rohn 45g, K8RI, 14:49
Re: [TowerTalk] Rohn 45g, Drax Felton, 14:41
[TowerTalk] Rohn 45g, les, 14:34
[TowerTalk] Old Mosley PRO 37, Yuri, 11:56
[TowerTalk] 7/8" Connectors, K0YR Thomas Rieff, 08:41

October 24, 2012

Re: [TowerTalk] Crank up tower bracing rubbing against cable, Bob K6UJ, 22:05
Re: [TowerTalk] Crank up tower bracing rubbing against cable, SPWoo, 21:55
Re: [TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m, DX Supply AB, 19:32
[TowerTalk] Johnson 132 or similar insulators wanted, John Becker, 17:14
Re: [TowerTalk] looking for 3/16 EHS guy wire supplier in CA AZ or NV, Jim W7RY, 10:47
Re: [TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m ?, RMorris, 10:36
Re: [TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m ?, Steve Hunt, 10:06
Re: [TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m ?, Steve Hunt, 09:47
[TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m ?, DX Supply AB, 09:20
[TowerTalk] looking for 3/16 EHS guy wire supplier in CA AZ or NV, Hector Garcia XE2K, 01:54

October 22, 2012

Re: [TowerTalk] Solenoid or Binocular configuration?, K8RI, 13:15
Re: [TowerTalk] HAM 3 Wiring, Jon Pearl - W4ABC, 10:03
[TowerTalk] HAM 3 Wiring, Tom Martin, 09:31
Re: [TowerTalk] Solenoid or Binocular configuration?, Mike, 09:16
Re: [TowerTalk] Ham 3 Rotor Wiring, K8RI, 04:19
Re: [TowerTalk] Ham 3 Rotor Wiring, Jon Pearl - W4ABC, 02:40
[TowerTalk] Ham 3 Rotor Wiring, Tom Martin, 01:09
Re: [TowerTalk] Solenoid or Binocular configuration?, Scott Townley, 00:55

October 21, 2012

Re: [TowerTalk] Solenoid or Binocular configuration?, K8RI, 22:51
Re: [TowerTalk] Tail Twister rotor, Kenneth Grimm, 20:30
Re: [TowerTalk] Solenoid or Binocular configuration?, Jim Brown, 18:09
[TowerTalk] Tail Twister rotor, mikflathead, 14:35
Re: [TowerTalk] Topband: 160 meter elevated vertical, Peter Voelpel, 05:29
Re: [TowerTalk] Solenoid or Binocular configuration?, Steve Hunt, 04:36

October 20, 2012

[TowerTalk] Solenoid or Binocular configuration?, K8RI, 22:24
Re: [TowerTalk] Topband: 160 meter elevated vertical, Dan Hearn, 15:23
Re: [TowerTalk] Topband: 160 meter elevated vertical, Steve Hunt, 14:53
Re: [TowerTalk] Topband: 160 meter elevated vertical, Jim Lux, 13:41
Re: [TowerTalk] Topband: 160 meter elevated vertical, Steve Hunt, 13:25
Re: [TowerTalk] Topband: 160 meter elevated vertical, Jim Lux, 11:56
Re: [TowerTalk] Topband: 160 meter elevated vertical, Cqtestk4xs, 11:47
Re: [TowerTalk] Antenna Testing, K7LXC, 10:34

October 19, 2012

[TowerTalk] Fw: Crank up tower bracing rubbing against cable, SPWoo, 23:33
[TowerTalk] TH-2 Large SWR changes during day, Brian Alsop, 22:40
Re: [TowerTalk] Crank up tower bracing rubbing against cable, K0DAN, 17:30
Re: [TowerTalk] Crank up tower bracing rubbing against cable, Bob K6UJ, 17:06
Re: [TowerTalk] Crank up tower bracing rubbing against cable, David Thompson, 16:37
Re: [TowerTalk] Crank up tower bracing rubbing against cable, TexasRF, 14:45
Re: [TowerTalk] Crank up tower bracing rubbing against cable, Rick Karlquist, 14:42
Re: [TowerTalk] Balun for an elevated vertical, Jim Brown, 14:29
Re: [TowerTalk] Crank up tower bracing rubbing against cable, SPWoo, 14:20
[TowerTalk] Balun for an elevated vertical, Cqtestk4xs, 12:41
Re: [TowerTalk] Greasing the Tilt-over Bolts on a tilt-over tower, Larry Loen, 12:27
Re: [TowerTalk] Antenna Testing, Bill Winkis, 08:13
Re: [TowerTalk] Experts, Jim Lux, 08:10
Re: [TowerTalk] Experts, Tom Osborne, 08:09
Re: [TowerTalk] Crank up tower bracing rubbing against cable, Doug Turnbull, 07:08
[TowerTalk] Crank up tower bracing rubbing against cable, Jim Thomson, 06:35
Re: [TowerTalk] Crank up tower bracing rubbing against cable, SPWoo, 04:13
[TowerTalk] TowerTalk If you had a choice, Jim Thomson, 03:47
Re: [TowerTalk] Experts, Jim Brown, 01:41

October 18, 2012

Re: [TowerTalk] Crank up tower bracing rubbing against cable, David Thompson, 18:10
Re: [TowerTalk] Prosistel PST61 and M2 20M5, John Langdon, 18:03
Re: [TowerTalk] Crank up tower bracing rubbing against cable, Rick Karlquist, 17:06
Re: [TowerTalk] Crank up tower bracing rubbing against cable, Alan Swinger, 16:44
Re: [TowerTalk] Crank up tower bracing rubbing against cable, Bob K6UJ, 16:26
Re: [TowerTalk] Crank up tower bracing rubbing against cable, Justin Whitstine, 15:16
Re: [TowerTalk] Crank up tower bracing rubbing against cable, SPWoo, 14:32
Re: [TowerTalk] Crank up tower bracing rubbing against cable, Doug Turnbull, 13:39
Re: [TowerTalk] Crank up tower bracing rubbing against cable, Rick Karlquist, 13:18
[TowerTalk] Crank up tower bracing rubbing against cable, SPWoo, 12:49
[TowerTalk] Experts, Howard Hoyt, 10:08
Re: [TowerTalk] Prosistel PST61 and M2 20M5, Jorge Diez - CX6VM, 09:42
Re: [TowerTalk] Prosistel PST61 and M2 20M5, john, 09:26
Re: [TowerTalk] Prosistel PST61 and M2 20M5, Adrian Rees, 09:08
[TowerTalk] (no subject), James McLaughlin, 09:06
[TowerTalk] FW:, James McLaughlin, 09:06
Re: [TowerTalk] Prosistel PST61 and M2 20M5, John Langdon, 07:10

October 17, 2012

[TowerTalk] Some information:, K8RI, 23:53
[TowerTalk] Antenna clamps, wayne wright, 22:56
Re: [TowerTalk] Antenna Testing, K8RI, 22:08
Re: [TowerTalk] TowerTalk If you had a choice, K8RI, 22:00
Re: [TowerTalk] If you had a choice, Rick Stealey, 19:40
Re: [TowerTalk] If you had a choice, Jim Lux, 19:28
Re: [TowerTalk] If you had a choice, David Gilbert, 17:01
Re: [TowerTalk] Antenna Testing, Jim Lux, 16:11
Re: [TowerTalk] If you had a choice, Jim Lux, 16:02
Re: [TowerTalk] Prosistel PST61 and M2 20M5, K8RI, 13:16
Re: [TowerTalk] TowerTalk If you had a choice, Jim Brown, 12:57
Re: [TowerTalk] Prosistel PST61 and M2 20M5, john, 11:21
[TowerTalk] (no subject), K2GN, 10:52
Re: [TowerTalk] Antenna Testing, Big Don, 10:51
Re: [TowerTalk] Antenna Testing, RMorris, 10:45
Re: [TowerTalk] Antenna Testing, Steve Hunt, 10:44
Re: [TowerTalk] Antenna Testing, Joe Subich, W4TV, 10:38
Re: [TowerTalk] TowerTalk If you had a choice, Bill Winkis, 10:30
Re: [TowerTalk] Antenna Testing, Big Don, 10:29
[TowerTalk] Prosistel PST61 and M2 20M5, Jorge Diez - CX6VM, 10:25
Re: [TowerTalk] Antenna Testing, Michael Goins, 10:18
Re: [TowerTalk] Antenna Testing, Big Don, 10:14
[TowerTalk] 80m Delta loop question, n2mm, 09:53
Re: [TowerTalk] If you had a choice, Joe Subich, W4TV, 09:33
Re: [TowerTalk] If you had a choice, David Robbins, 09:11
[TowerTalk] Antenna Testing, Ward Silver, 09:11
Re: [TowerTalk] If you had a choice, Jim Lux, 09:02
Re: [TowerTalk] BX tower grounding connector, Gary \"Joe\" Mayfield, 07:32
Re: [TowerTalk] If you had a choice, Stan Stockton, 05:38
Re: [TowerTalk] If you had a choice, Ian White GM3SEK, 04:58
Re: [TowerTalk] BX tower grounding connector, Gene Smar, 04:38
[TowerTalk] 150 foot tower, Peter Helder, 00:14

October 16, 2012

[TowerTalk] BX tower grounding connector, Missouri Guy, 23:21
Re: [TowerTalk] If you had a choice, Jim Lux, 22:12
Re: [TowerTalk] If you had a choice, Jim Lux, 21:14
Re: [TowerTalk] If you had a choice, EZ Rhino, 19:37
Re: [TowerTalk] If you had a choice, Jim Brown, 19:22
Re: [TowerTalk] If you had a choice, Jim Brown, 19:18
Re: [TowerTalk] If you had a choice, EZ Rhino, 19:09
Re: [TowerTalk] If you had a choice, Ward Silver, 18:13
Re: [TowerTalk] Tower removal. Gin Pole or something else?, Dan Cisson, 18:12
Re: [TowerTalk] Tower removal. Gin Pole or something else?, Dan Cisson, 18:05
Re: [TowerTalk] TowerTalk Digest, Vol 118, Issue 35, Ro Grrr, 17:59
Re: [TowerTalk] Tower removal. Gin Pole or something else?, Dan Cisson, 17:58
Re: [TowerTalk] If you had a choice, john, 17:53
Re: [TowerTalk] FW: If you had a choice, Jon Pearl - W4ABC, 15:54
[TowerTalk] rotor loop, Larry stowell, 15:31
Re: [TowerTalk] Tower removal. Gin Pole or something else?, Dan Cisson, 14:46
Re: [TowerTalk] Tower removal. Gin Pole or something else?, Dan Cisson, 13:54
Re: [TowerTalk] TowerTalk If you had a choice, David Gilbert, 13:43
[TowerTalk] If you had a choice, Bill Ogden, 12:38
Re: [TowerTalk] TowerTalk If you had a choice, Jim Brown, 12:15
Re: [TowerTalk] If you had a choice, Ward Silver, 12:13
Re: [TowerTalk] If you had a choice, john, 10:14
Re: [TowerTalk] TowerTalk If you had a choice, K7LXC, 10:09
Re: [TowerTalk] If you had a choice, Dan Bookwalter, 09:28
Re: [TowerTalk] If you had a choice, Ward Silver, 09:10
Re: [TowerTalk] DXE 4SQ question!!!, Adrian Rees, 03:20

October 15, 2012

Re: [TowerTalk] FW: If you had a choice, Cqtestk4xs, 23:32
Re: [TowerTalk] FW: If you had a choice, Dick Dievendorff, 23:20
Re: [TowerTalk] FW: If you had a choice, chetmoore, 23:00
Re: [TowerTalk] FW: If you had a choice, Joe Subich, W4TV, 22:17
[TowerTalk] FW: If you had a choice, Michael Zeglen, 22:05
Re: [TowerTalk] Tower removal. Gin Pole or something else?, K8RI, 20:25
Re: [TowerTalk] Tower removal. Gin Pole or something else?, Dan Cisson, 20:22
Re: [TowerTalk] Tower removal. Gin Pole or something else?, K8RI, 20:19
Re: [TowerTalk] DXE 4SQ question!!!, Bert Almemo, 20:17
Re: [TowerTalk] Tower removal. Gin Pole or something else?, Dan Cisson, 18:44
Re: [TowerTalk] Tower removal. Gin Pole or something else?, Mike Lyon, 17:25
Re: [TowerTalk] Tower removal. Gin Pole or something else?, Dan Cisson, 17:22
[TowerTalk] Tower removal. Gin Pole or something else?, Mike Lyon, 16:59
Re: [TowerTalk] 80m Delta loop Question, Scott MacKenzie, 16:37
[TowerTalk] 80m Delta loop Question, Carol Richards, 16:28
[TowerTalk] DXE 4SQ question!!!, Jorge Diez - CX6VM, 13:11
Re: [TowerTalk] Man-lifts, Richard Thorne, 13:10
[TowerTalk] Man-lifts, Howard Hoyt, 12:27
[TowerTalk] Boom lift Re: Choice of aluminum, Jim Lux, 09:04
[TowerTalk] Looking for a remote coax swithc, Rene Correa, K5JX, 08:32
Re: [TowerTalk] Nested 4SQs, David Robbins, 07:52
Re: [TowerTalk] Nested 4SQs, David Robbins, 07:27
[TowerTalk] Choice of aluminum, Jim Thomson, 04:51
Re: [TowerTalk] Water pipe as a mast, K8RI, 03:43
[TowerTalk] Water pipe as a mast, Spencer, 02:06

October 14, 2012

Re: [TowerTalk] tower height, john, 22:19
Re: [TowerTalk] tower height repost, Steve W3AHL, 21:24
Re: [TowerTalk] Choice of aluminum, Grant Saviers, 21:13
Re: [TowerTalk] tower height repost, K8RI, 19:38
Re: [TowerTalk] tower height repost, Brian Alsop, 18:16
Re: [TowerTalk] tower height repost, Bob K6UJ, 17:07
Re: [TowerTalk] Choice of aluminum, K8RI, 16:25
[TowerTalk] Nested 4SQs, Rudy Bakalov, 16:17
Re: [TowerTalk] tower height repost, Dave Cole, 15:58
[TowerTalk] tower height repost, mikflathead, 14:09
[TowerTalk] tower height, mikflathead, 13:59
Re: [TowerTalk] Choice of aluminum, Richard (Rick) Karlquist, 12:40
Re: [TowerTalk] Water pipe as a mast, Richard (Rick) Karlquist, 12:26
Re: [TowerTalk] Yet another worm gear box failure..., k2qmf, 11:30
Re: [TowerTalk] Choice of aluminum, john, 10:11
Re: [TowerTalk] Choice of aluminum, K1TTT, 07:33
Re: [TowerTalk] Choice of aluminum, K8RI, 01:53
[TowerTalk] Fw: Testing Yagi at ground level, Fernando EC1CT, 01:42
Re: [TowerTalk] Testing Yagi at ground level, Bill Winkis, 01:10

October 13, 2012

[TowerTalk] Fwd: Aluminum for 80m vertical, Ray Benny, 23:07
[TowerTalk] Choice of aluminum, 80m vertical., k3hx@juno.com, 23:04
Re: [TowerTalk] Choice of aluminum, David Jordan, 22:49
Re: [TowerTalk] Choice of aluminum, EZ Rhino, 21:59
Re: [TowerTalk] Choice of aluminum, Rudy Bakalov, 21:54
Re: [TowerTalk] Choice of aluminum, K8RI, 21:48
Re: [TowerTalk] Choice of aluminum, Rudy Bakalov, 21:36
Re: [TowerTalk] Choice of aluminum, Rudy Bakalov, 21:34
Re: [TowerTalk] Choice of aluminum, David Jordan, 21:24
Re: [TowerTalk] Choice of aluminum, Grant Saviers, 20:44
Re: [TowerTalk] Choice of aluminum, scottw3tx@verizon.net, 20:38
Re: [TowerTalk] Choice of aluminum, Rudy Bakalov, 20:15
Re: [TowerTalk] Same question for the RC1-H, Dino Darling, 20:06
Re: [TowerTalk] Choice of aluminum, Jorge Diez - CX6VM, 20:02
[TowerTalk] Waterpipe Mast, Wilson Lamb, 19:59
Re: [TowerTalk] Choice of aluminum, john, 19:48
Re: [TowerTalk] Choice of aluminum, Rudy Bakalov, 19:45
Re: [TowerTalk] Yet another worm gear box failure..., Dino Darling, 19:45
Re: [TowerTalk] Choice of aluminum, Jorge Diez - CX6VM, 19:36
Re: [TowerTalk] Yet another worm gear box failure..., Rich Hallman - N7TR, 19:32
Re: [TowerTalk] Aluminum for 80m vertical, jcjacobsen, 19:30
Re: [TowerTalk] Water pipe as a mast, K8RI, 19:17
Re: [TowerTalk] Choice of aluminum, Rudy Bakalov, 19:04
Re: [TowerTalk] Choice of aluminum, TexasRF, 18:36
Re: [TowerTalk] Choice of aluminum, Rudy Bakalov, 18:35
Re: [TowerTalk] Choice of aluminum, n8de, 18:11
[TowerTalk] 50-60 ft aliminium self supporting tower diagram needed, Jorge Diez - CX6VM, 18:01
Re: [TowerTalk] Choice of aluminum, Larry Banks, 17:45
[TowerTalk] Choice of aluminum, Rudy Bakalov, 17:09
Re: [TowerTalk] Permit finally!, Bryan Swadener, 16:05
Re: [TowerTalk] Yet another worm gear box failure..., Ray Benny, 15:35
Re: [TowerTalk] Permit finally!, Steve Jones, 15:24
Re: [TowerTalk] Yet another worm gear box failure..., Scott MacKenzie, 13:46
Re: [TowerTalk] Yet another worm gear box failure..., KJ6Y, 13:36
Re: [TowerTalk] Water pipe as a mast, Jim W7RY, 13:32
Re: [TowerTalk] Water pipe as a mast, Jim Hoge, 12:35
Re: [TowerTalk] Testing Yagi at ground level, John Lemay, 12:22
[TowerTalk] Water pipe as a mast, Dan Bookwalter, 12:13
[TowerTalk] Testing Yagi at ground level, Dan Bookwalter, 12:11
Re: [TowerTalk] Grounding..., Dave Cole, 10:36
Re: [TowerTalk] Yet another worm gear box failure..., Rich Hallman - N7TR, 10:36
Re: [TowerTalk] Grounding..., Jim W7RY, 10:22
[TowerTalk] Yet another worm gear box failure..., Dino Darling, 10:17
Re: [TowerTalk] Grounding..., Jim Lux, 10:11
Re: [TowerTalk] Grounding..., K1TTT, 07:34
[TowerTalk] Grounding..., Dave Cole, 07:09

October 12, 2012

[TowerTalk] Tower progress and build log, Rick Kiessig, 17:47
Re: [TowerTalk] 80 Meter Delta Loop, Peter Chamalian, 13:51
[TowerTalk] Permit finally!, Dave Cole, 08:44
[TowerTalk] Motorized MA-550 tower will not retract, John Banbury, 00:37
Re: [TowerTalk] 80 Meter Delta Loop, Dick Green, 00:37

October 11, 2012

[TowerTalk] m2inc online store down?, Jorge Diez - CX6VM, 19:36
Re: [TowerTalk] 80 meter Delta Loop on 40, Bob K6UJ, 19:23
[TowerTalk] 80 meter Delta Loop on 40, rfman45, 18:12
Re: [TowerTalk] 80 meter Delta Loop on 40, Kenneth Goodwin, 13:31
[TowerTalk] Yaesu 800DXA Followup- FINAL, Mark Adams, 13:03
[TowerTalk] loop antenna, Spencer, 12:57
[TowerTalk] 80 Meter Delta Loop, Dennis W0JX, 11:20
Re: [TowerTalk] Rotor Loop, KD0Q-Glenn, 10:56
[TowerTalk] 80 meter Delta Loop on 40, rfman45, 09:06
Re: [TowerTalk] Stubs, Braco OE1EMS, 07:39
Re: [TowerTalk] 800 SDX Connectors, Doug Scribner, 07:39

October 10, 2012

Re: [TowerTalk] Stubs, Jim Brown, 17:10
Re: [TowerTalk] Stubs, Al Kozakiewicz, 15:52
Re: [TowerTalk] Stubs, K1TTT, 15:38
Re: [TowerTalk] Stubs, Jim Brown, 15:13
Re: [TowerTalk] Stubs, K1TTT, 13:43
[TowerTalk] 800 SDX Connectors, Jerry, 12:29
[TowerTalk] Stubs, Tom Osborne, 12:15
[TowerTalk] Rotor Pal QST, Wayne Kline, 09:53
Re: [TowerTalk] Velocity factor of Coax, David Robbins, 07:33
Re: [TowerTalk] Yaesu 800DXA Followup, David Robbins, 07:30
Re: [TowerTalk] Velocity factor of Coax, Jim Brown, 02:22
Re: [TowerTalk] Rotor Loop, K8RI, 01:06
[TowerTalk] Velocity factor of Coax, Michael Zeglen, 01:00

October 09, 2012

Re: [TowerTalk] Rotor Loop, Doug Renwick, 23:30
Re: [TowerTalk] Yaesu 800DXA Followup, Mark Adams, 21:11
Re: [TowerTalk] Rotor Loop, Gene Fuller, 21:09
Re: [TowerTalk] Rotor Loop, Rick Karlquist, 20:28
[TowerTalk] Telrex 20M-546, Mike, 18:57
Re: [TowerTalk] Rotor Loop, Gene Fuller, 18:06
Re: [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, K8RI, 17:31
[TowerTalk] Rotor Loop, KD0Q-Glenn, 16:07
Re: [TowerTalk] Grounding question..., K7LXC, 15:23
Re: [TowerTalk] Why galvanized crank up cables instead of stainless?, Georgens, Tom, 14:27
Re: [TowerTalk] Replacing crank up tower cables, K7LXC, 14:17
Re: [TowerTalk] Why galvanized crank up cables instead of stainless?, K8RI, 13:59
Re: [TowerTalk] Replacing crank up tower cables, Rick Karlquist, 13:45
Re: [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, Jim Lux, 13:11
[TowerTalk] Grounding question..., Dave Cole, 12:47
Re: [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, David Robbins, 12:45
Re: [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, Jim Lux, 12:32
Re: [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, Jim Lux, 12:29
Re: [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, Jim Brown, 12:05
Re: [TowerTalk] Why galvanized crank up cables instead of stainless?, k2qmf, 11:47
[TowerTalk] Fwd: Why galvanized crank up cables instead of stainless?, Hans Hammarquist, 11:35
Re: [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, John W, 11:34
Re: [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, Grant Saviers, 11:27
Re: [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, chas, 11:08
Re: [TowerTalk] Why galvanized crank up cables instead of stainless?, K7LXC, 10:28
[TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?, John W, 09:13
Re: [TowerTalk] Yaesu 800DXA Followup, Mark Adams, 09:03
Re: [TowerTalk] Yaesu 800DXA Followup, Mike, 08:45
[TowerTalk] Replacing crank up tower cables, Marv Shelton, 08:37
Re: [TowerTalk] Yaesu 800DXA Followup, Doug Scribner, 08:16
Re: [TowerTalk] Yaesu 800DXA Followup, David Robbins, 07:49
Re: [TowerTalk] Yaesu 800DXA Followup, Pete Smith N4ZR, 06:44
Re: [TowerTalk] Green Heron RT-21/21D Rotor Controllers, k7hph, 02:31
Re: [TowerTalk] Green Heron RT-21/21D Rotor Controllers, Tim Duffy K3LR, 00:43
[TowerTalk] Green Heron RT-21/21D Rotor Controllers, Mark, K5ER, 00:11

October 08, 2012

Re: [TowerTalk] Why galvanized crank up cables instead of stainless?, Dan Zimmerman N3OX, 23:59
Re: [TowerTalk] Why galvanized crank up cables instead of stainless?, Dick Green WC1M, 23:48
[TowerTalk] Yaesu 800DXA Followup, Mark Adams, 23:14
[TowerTalk] FW: Why galvanized crank up cables instead of stainless?, KM5VI, 23:05
[TowerTalk] Changing cables, Michael Goins, 22:39
Re: [TowerTalk] Why galvanized crank up cables instead of stainless?, Mike, 22:38
[TowerTalk] Why galvanized crank up cables instead of stainless?, Richard (Rick) Karlquist, 22:27
[TowerTalk] Wanted: ring rotor (parts unit okay), Rob Frohne, 22:19
Re: [TowerTalk] RC1-H, Dave Cole, 21:08
[TowerTalk] RC1-H wal wart P/S ??, W1JCW, 21:04
Re: [TowerTalk] RC1-H, Bill Axelrod, 20:22
[TowerTalk] RC1-H, W1JCW, 18:17
Re: [TowerTalk] Putting a rotor in a crank-up?, Grant Saviers, 17:11
Re: [TowerTalk] Putting a rotor in a crank-up?, Rick Karlquist, 16:32
Re: [TowerTalk] TowerTalk Digest, Vol 118, Issue 9, W4ABW, 16:01
[TowerTalk] Putting a rotor in a crank-up?, Steve Jones, 15:01
Re: [TowerTalk] Green Heron RT-21/21D Rotor Controllers, Les Kalmus, 14:11
Re: [TowerTalk] Inverted V on a retractable tower (David Thompson), Spencer, 13:31
Re: [TowerTalk] Guying a TX-472 bottom section, Jim Lux, 13:12
Re: [TowerTalk] Guying a TX-472 bottom section, K7LXC, 12:45
Re: [TowerTalk] What is this?, Bob K6UJ, 12:20
Re: [TowerTalk] Guying a TX-472 bottom section, SPWoo, 12:07
[TowerTalk] Green Heron RT-21/21D Rotor Controllers, SPWoo, 11:59
Re: [TowerTalk] What is this?, Doug Scribner, 11:41
Re: [TowerTalk] What is this?, Pete Smith N4ZR, 11:10
Re: [TowerTalk] What is this?, Dick Dievendorff, 10:40
Re: [TowerTalk] What is this?, Hector Garcia XE2K, 09:59
Re: [TowerTalk] What is this?, mike, 09:58
Re: [TowerTalk] What is this?, David Robbins, 09:54
[TowerTalk] Same question for the RC1-H, Dave Cole, 09:39
[TowerTalk] What is this?, Dave Cole, 09:37
Re: [TowerTalk] Green Heron RT-21/21D Rotor Controllers, K2hk, 09:14
Re: [TowerTalk] Green Heron RT-21/21D Rotor Controllers, john, 08:15
Re: [TowerTalk] Green Heron RT-21/21D Rotor Controllers, Chuck Sudds, 07:49
Re: [TowerTalk] Green Heron RT-21/21D Rotor Controllers, Stan Stockton, 07:01
Re: [TowerTalk] Green Heron RT-21/21D Rotor Controllers, k7hph, 01:38
Re: [TowerTalk] Guying a TX-472 bottom section, SPWoo, 00:07

October 07, 2012

[TowerTalk] EZNEC Model for Mosley Pro-57B or Pro-67C3, David Gilbert, 23:45
Re: [TowerTalk] Guying a TX-472 bottom section, K7LXC, 18:06
Re: [TowerTalk] Inverted V on a retractable tower, David Thompson, 13:41
Re: [TowerTalk] Coax radius, Mike, 06:25
Re: [TowerTalk] Inverted V on a retractable tower, Larry Loen, 00:40

October 06, 2012

Re: [TowerTalk] Coax radius, K8RI, 22:02
[TowerTalk] Coax radius, Mike, 20:07
Re: [TowerTalk] Inverted V on a retractable tower, K8RI, 19:59
Re: [TowerTalk] SSV site question, el34guy@aol.com, 19:50
Re: [TowerTalk] Inverted V on a retractable tower, Missouri Guy, 19:29
[TowerTalk] Inverted V on a retractable tower, SPWoo, 19:20
Re: [TowerTalk] Inverted V on a retractable tower, John E. Cleeve, 18:01
[TowerTalk] SSV site question, Entertainment Innovations, 17:45
Re: [TowerTalk] Inverted V on a retractable tower, Ian White GM3SEK, 16:58
Re: [TowerTalk] Inverted V on a retractable tower, SPWoo, 16:44
Re: [TowerTalk] Inverted V on a retractable tower, Larry Loen, 15:58
[TowerTalk] Inverted V on a retractable tower, SPWoo, 14:29
[TowerTalk] Guying a TX-472 bottom section, SPWoo, 14:27

October 05, 2012

Re: [TowerTalk] Lightning protection and control wires, Jim Lux, 10:44
Re: [TowerTalk] Lightning protection and control wires, Julius Fazekas, 07:38
Re: [TowerTalk] Aligning rotor, mast and thrust bearing, n8de, 07:35
Re: [TowerTalk] Aligning rotor, mast and thrust bearing, K1TTT, 07:17
[TowerTalk] Aligning rotor, mast and thrust bearing, Rick Kiessig, 06:11
Re: [TowerTalk] Tailtwister, K8RI, 02:58
Re: [TowerTalk] Motorize LM-470 Tilt-Over, Jon Pearl - W4ABC, 01:29
Re: [TowerTalk] Tailtwister, Jon Pearl - W4ABC, 01:16

October 04, 2012

Re: [TowerTalk] Lightning protection and control wires, Grant Saviers, 15:01
Re: [TowerTalk] Feeder spacing, K7LXC, 14:04
Re: [TowerTalk] Lightning protection and control wires, Dick Green WC1M, 14:00
Re: [TowerTalk] Feeder spacing, David Robbins, 13:17
Re: [TowerTalk] Feeder spacing, n8de, 12:38
[TowerTalk] Motorize LM-470 Tilt-Over, Richard Solomon, 12:01
[TowerTalk] Feeder spacing, Hans Hammarquist, 11:58

October 03, 2012

Re: [TowerTalk] Lightning protection and control wires, Larry Loen, 18:40
Re: [TowerTalk] Lightning protection and control wires, Mark Robinson, 16:52
Re: [TowerTalk] Lightning protection and control wires, Mike, 15:19
Re: [TowerTalk] lightening protection, Wayne Crawford, 15:02
Re: [TowerTalk] Lightning protection and control wires, David Jordan, 14:35
Re: [TowerTalk] Lightning protection and control wires, Ray Benny, 14:34
Re: [TowerTalk] Lightning protection and control wires, john, 14:31
Re: [TowerTalk] Lightning protection and control wires, Pete Smith N4ZR, 14:04
Re: [TowerTalk] Lightning protection and control wires, Matt Fearnow, 13:54
Re: [TowerTalk] Lightning protection and control wires, DGB, 13:48
Re: [TowerTalk] Tailtwister, Ray Benny, 13:17
[TowerTalk] Lightning protection and control wires, Larry Loen, 12:35
[TowerTalk] Tailtwister, Cqtestk4xs, 12:24

October 01, 2012

[TowerTalk] Fw: Steel Antenna, Windmill, Hamm Radio, Towers - $300 (Buffalo ), Kathy Bookmiller, 22:12
Re: [TowerTalk] oops,,, better address for building a tower ...., Roy Breon, 20:18
Re: [TowerTalk] oops,,, better address for building a tower ...., Bert Almemo, 20:07
Re: [TowerTalk] THANKS....Phased Verticals 40m......, Jim Brown, 11:50
[TowerTalk] oops,,, better address for building a tower ...., bill ny9h, 11:35
[TowerTalk] building a 1500' tower video, bill ny9h, 11:10
[TowerTalk] THANKS....Phased Verticals 40m......, John Frazier, 09:35